[PATCH V3 2/2] irqchip/gicv3-its: Implement two-level(indirect) device table support
Shanker Donthineni
shankerd at codeaurora.org
Sat Jun 4 07:42:50 PDT 2016
Hi Marc,
On 06/04/2016 04:09 AM, Marc Zyngier wrote:
> On Mon, 9 May 2016 15:58:26 -0500
> Shanker Donthineni <shankerd at codeaurora.org> wrote:
>
> Hi Shanker,
>
>> Since device IDs are extremely sparse, the single, a.k.a flat table is
>> not sufficient for the following two reasons.
>>
>> 1) According to ARM-GIC spec, ITS hw can access maximum of 256(pages)*
>> 64K(pageszie) bytes. In the best case, it supports upto DEVid=21
> pagesize
>> sparse with minimum device table entry size 8bytes.
>>
>> 2) The maximum memory size that is possible without memblock depends on
>> MAX_ORDER. 4MB on 4K page size kernel with default MAX_ORDER, so it
>> supports DEVid range 19bits.
>>
>> The two-level device table feature brings us two advantages, the first
>> is a very high possibility of supporting upto 32bit sparse, and the
>> second one is the best utilization of memory allocation.
>>
>> The feature is enabled automatically during driver probe if a single
>> ITS page is not adequate for flat table and the hardware is capable
>> of two-level table walk.
>>
>> Signed-off-by: Shanker Donthineni <shankerd at codeaurora.org>
>> ---
>>
>> Changes since v2:
>> Fixed a porting bug device 'id' validation check in
> its_alloc_device_table()
>> Changes since v1:
>> Most of this patch has been rewritten after refactoring
> its_alloc_tables().
>> Always enable device two-level if the memory requirement is more than
> PAGE_SIZE.
>> Fixed the coding bug that breaks on the BE machine.
>> Edited the commit text.
>>
>> drivers/irqchip/irq-gic-v3-its.c | 97
> +++++++++++++++++++++++++++++++++-------
>> 1 file changed, 80 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-gic-v3-its.c
> b/drivers/irqchip/irq-gic-v3-its.c
>> index b23e00c..60a1060 100644
>> --- a/drivers/irqchip/irq-gic-v3-its.c
>> +++ b/drivers/irqchip/irq-gic-v3-its.c
>> @@ -938,6 +938,18 @@ retry_baser:
>> return 0;
>> }
>>
>> +/**
>> + * Find out whether an implemented baser register supports a single,
> flat table
>> + * or a two-level table by reading bit offset at '62' after writing '1'
> to it.
>> + */
>> +static u64 its_baser_check_indirect(struct its_baser *baser)
>> +{
>> + u64 val = GITS_BASER_InnerShareable | GITS_BASER_WaWb;
>> +
>> + writeq_relaxed(val | GITS_BASER_INDIRECT, baser->hwreg);
>> + return (readq_relaxed(baser->hwreg) & GITS_BASER_INDIRECT);
> That's a bit ugly. You're returning a mask for the indirect bit, and
> treat it either as a boolean or a mask. I'd rather you return a
> boolean, treat as such in most of this code, and only turn it into a
> mask when you compute the GITS_BASER value.
>
>> +}
>> +
>> static int its_alloc_tables(const char *node_name, struct its_node
> *its)
>> {
>> u64 typer = readq_relaxed(its->base + GITS_TYPER);
>> @@ -964,6 +976,7 @@ static int its_alloc_tables(const char *node_name,
> struct its_node *its)
>> u64 entry_size = GITS_BASER_ENTRY_SIZE(val);
>> int order = get_order(psz);
>> struct its_baser *baser = its->tables + i;
>> + u64 indirect = 0;
> The scope of this flag is confusingly wide. Once an indirect table has
> been created, all the following tables are indirect too, which is
> definitely not what we want (only the device table should be
> indirected).
Sorry for confusion, the scope of this variable is per BASERn parsing and flag will not be carried to the next BASERn entry.
>>
>> if (type == GITS_BASER_TYPE_NONE)
>> continue;
>> @@ -977,17 +990,27 @@ static int its_alloc_tables(const char *node_name,
> struct its_node *its)
>> * Allocate as many entries as required to fit the
>> * range of device IDs that the ITS can grok... The ID
>> * space being incredibly sparse, this results in a
>> - * massive waste of memory.
>> + * massive waste of memory if two-level device table
>> + * feature is not supported by hardware.
>> *
>> * For other tables, only allocate a single page.
>> */
>> if (type == GITS_BASER_TYPE_DEVICE) {
>> - /*
>> - * 'order' was initialized earlier to the default
> page
>> - * granule of the the ITS. We can't have an
> allocation
>> - * smaller than that. If the requested allocation
>> - * is smaller, round up to the default page
> granule.
>> - */
>> + if ((entry_size << ids) > psz)
>> + indirect =
> its_baser_check_indirect(baser);
>> +
>> + if (indirect) {
>> + /*
>> + * The size of the lvl2 table is equal to
> ITS
>> + * page size which is 'psz'. For computing
> lvl1
>> + * table size, subtract ID bits that
> sparse
>> + * lvl2 table from 'ids' which is reported
> by
>> + * ITS hardware times lvl1 table entry
> size.
>> + */
>> + ids -= ilog2(psz / entry_size);
>> + entry_size = GITS_LVL1_ENTRY_SIZE;
>> + }
>> +
>> order = max(get_order(entry_size << ids), order);
>> if (order >= MAX_ORDER) {
>> order = MAX_ORDER - 1;
> This needs some splitting as well. Given that we're giving the
> Device table a special treatment, I think it'd make sense to give it
> its own function that would return the order of the the allocation and
> the indirect flag.
Okay, I'll move to a new function that handles device table specific code.
>> @@ -997,7 +1020,7 @@ static int its_alloc_tables(const char *node_name,
> struct its_node *its)
>> }
>> }
>>
>> - err = its_baser_setup(its, baser, order, 0);
>> + err = its_baser_setup(its, baser, order, indirect);
>> if (err < 0) {
>> its_free_tables(its);
>> return err;
>> @@ -1187,10 +1210,57 @@ static struct its_baser *its_get_baser(struct
> its_node *its, u32 type)
>> return NULL;
>> }
>>
>> +static bool its_alloc_device_table(struct its_node *its, u32 dev_id)
>> +{
>> + struct its_baser *baser;
>> + struct page *page;
>> + u32 esz, idx;
>> + u64 *table;
>> +
>> + baser = its_get_baser(its, GITS_BASER_TYPE_DEVICE);
>> +
>> + /* Don't allow device id that exceeds ITS hardware limit */
>> + if (!baser)
>> + return (ilog2(dev_id) < its->device_ids);
>> +
>> + /* Don't allow device id that exceeds single, flat table limit */
>> + esz = GITS_BASER_ENTRY_SIZE(baser->val);
>> + if (!(baser->val & GITS_BASER_INDIRECT))
>> + return (dev_id < (PAGE_ORDER_TO_SIZE(baser->order) /
> esz));
>> +
>> + /* Compute 1st level table index & check if that exceeds table
> limit */
>> + idx = dev_id >> ilog2(baser->psz / esz);
>> + if (idx >= (PAGE_ORDER_TO_SIZE(baser->order) /
> GITS_LVL1_ENTRY_SIZE))
>> + return false;
>> +
>> + table = baser->base;
>> +
>> + /* Allocate memory for 2nd level table */
>> + if (!table[idx]) {
>> + page = alloc_pages(GFP_KERNEL | __GFP_ZERO,
> get_order(baser->psz));
>> + if (!page)
>> + return false;
>> +
>> + /* Flush memory to PoC if hardware doesn't support
> coherency */
>> + if (!(baser->val & GITS_BASER_SHAREABILITY_MASK))
>> + __flush_dcache_area(page_address(page),
> baser->psz);
>> +
>> + table[idx] = cpu_to_le64(page_to_phys(page) |
> GITS_BASER_VALID);
>> +
>> + /* Flush memory to PoC if hardware doesn't support
> coherency */
>
> Please don't use the same comment twice, this is a bit misleading.
> Explain that the first clean/invalidate pushes out the data page, and
> that the second pushes out the pointer to that page.
>
I'll fix.
>> + if (!(baser->val & GITS_BASER_SHAREABILITY_MASK))
>> + __flush_dcache_area(table + idx,
> GITS_LVL1_ENTRY_SIZE);
>> +
>> + /* Ensure updated table contents are visible to ITS
> hardware */
>> + dsb(sy);
>> + }
>> +
>> + return true;
>> +}
>> +
>> static struct its_device *its_create_device(struct its_node *its, u32
> dev_id,
>> int nvecs)
>> {
>> - struct its_baser *baser;
>> struct its_device *dev;
>> unsigned long *lpi_map;
>> unsigned long flags;
>> @@ -1201,14 +1271,7 @@ static struct its_device
> *its_create_device(struct its_node *its, u32 dev_id,
>> int nr_ites;
>> int sz;
>>
>> - baser = its_get_baser(its, GITS_BASER_TYPE_DEVICE);
>> -
>> - /* Don't allow 'dev_id' that exceeds single, flat table limit */
>> - if (baser) {
>> - if (dev_id >= (PAGE_ORDER_TO_SIZE(baser->order) /
>> - GITS_BASER_ENTRY_SIZE(baser->val)))
>> - return NULL;
>> - } else if (ilog2(dev_id) >= its->device_ids)
>> + if (!its_alloc_device_table(its, dev_id))
>> return NULL;
>>
>> dev = kzalloc(sizeof(*dev), GFP_KERNEL);
>
> Thanks,
>
> M.
--
Shanker Donthineni
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
More information about the linux-arm-kernel
mailing list