[PATCH v6 00/11] qcom: Add support for TSENS driver

Zhang Rui rui.zhang at intel.com
Thu Jul 28 01:33:48 PDT 2016


Hi, Rajendra,

On 四, 2016-06-30 at 09:55 +0530, Rajendra Nayak wrote:
> Rui,
> 
> On 06/17/2016 11:29 AM, Nayak, Rajendra wrote:
> > 
> > Hey Eduardo,
> > 
> > On 6/10/2016 11:32 AM, Rajendra Nayak wrote:
> > > 
> > > Eduardo,
> > > 
> > > On 05/05/2016 02:21 PM, Rajendra Nayak wrote:
> > > > 
> > > > Current set of patches apply on 4.6-rc6. Fixes for the nvmem
> > > > apis
> > > > are now posted [1] and queued in -next [2]
> > > > Patches [1-6] will need to be merged via thermal tree/Eduardo.
> > > Any plans to pull these in for 4.8?
> > These patches have been on the list for quite a while, and they
> > do not have any outstanding dependencies or comments to be
> > addressed. I would really hope to see these in for 4.8.
> > Let me know if there is something you want me to address before
> > you pull them in.
> Would you be able to pull this driver in? I haven't heard back
> anything from Eduardo despite multiple pings.
> These patches (v6) have been on the list for a couple months now,
> which address all issues/concerns that were raised by Eduardo
> in his previous reviews.
> 
Sorry for my late response as I took medical leave earlier this month
for a noise surgery and I'm just back to work.

I synced with Eduardo yesterday, he was also really busy recently, but
he will go through the pending patches soon.
So, for this patch set, I still prefer to let Eduardo to take it if he
has time, and I will take them if you still don't get feedback from
Eduardo after the merge window, does this sound okay for you?

thanks,
rui

> regards,
> Rajendra
> 
> > 
> > 
> > regards,
> > Rajendra
> > 
> > > 
> > > 
> > > regards,
> > > Rajendra
> > > 
> > > > 
> > > > Patches [7-11] will need to go via qcom-msm tree/Andy.
> > > > 
> > > > Changes since v5:
> > > > * Minor review fixes from Eduardo
> > > > 
> > > > Changes since v4:
> > > > * dropped qcom,tsens-slopes binding, used coefficients instead
> > > > * dropped qcom,sensor-id binding
> > > > * Added support for msm8996 family
> > > > * Other minor review fixes from v4
> > > > 
> > > > Changes since v3:
> > > > * Dropped 'clk: qcom: create virtual child device for TSENS'
> > > > which
> > > > is picked up by Stephen
> > > > * Updated GCC bindings with optional TSENS properties
> > > > 
> > > > Changes since v2:
> > > > * Minor review fixes from Stephen/Punit and rebase on 4.3-rc4
> > > > 
> > > > Changes since v1:
> > > > * Created virtual tsens device from gcc driver for 8960,
> > > > with DT having a single node for gcc and tsens
> > > > * Minor fixes with rebasing on 4.3-rc1
> > > > 
> > > > Changes since RFC:
> > > > * Added support for 8916 and 8084
> > > > * Based off the latest nvmem framework patches [1]
> > > > * Minor review fixes for comments mostly from Lina
> > > > 
> > > > This is an attempt to have a single TSENS driver for
> > > > the different versions of the TSENS IP that exist, on
> > > > different qcom msm/apq SoCs'
> > > > Support is added for msm8916, msm8960, msm8974 and msm8996
> > > > families.
> > > > 
> > > > A lot of the work is based of original code from Stephen Boyd
> > > > and Siddartha Mohanadoss. I have also picked some of what
> > > > Narendran Rajan did in his attempt to upstream the support
> > > > for 8960 family. I could not keep the original authorship on
> > > > any of the patches because I ended up moving the code around
> > > > quite a bit in an effort to have a single driver for the
> > > > various devices. I would be glad to change the authorship
> > > > for any of the patches if needed.
> > > > 
> > > > [1] https://lkml.org/lkml/2016/4/24/103
> > > > [2] git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-
> > > > misc.git char-misc-next
> > > > 
> > > > Rajendra Nayak (11):
> > > >    thermal: qcom: tsens: Add a skeletal TSENS drivers
> > > >    thermal: qcom: tsens-8916: Add support for 8916 family of
> > > > SoCs
> > > >    thermal: qcom: tsens-8974: Add support for 8974 family of
> > > > SoCs
> > > >    thermal: core: export apis to get slope and offset
> > > >    thermal: qcom: tsens-8960: Add support for 8960 family of
> > > > SoCs
> > > >    thermal: qcom: tsens-8996: Add support for 8996 family of
> > > > SoCs
> > > >    arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
> > > >    arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
> > > >    arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
> > > >    arm64: dts: msm8916: Add thermal zones, tsens and qfprom
> > > > nodes
> > > >    arm64: dts: msm8996: Add thermal zones, tsens and qfprom
> > > > nodes
> > > > 
> > > >   .../devicetree/bindings/clock/qcom,gcc.txt         |  18 ++
> > > >   .../devicetree/bindings/thermal/qcom-tsens.txt     |  21 ++
> > > >   Documentation/thermal/sysfs-api.txt                |  12 +
> > > >   arch/arm/boot/dts/qcom-apq8064.dtsi                | 103
> > > > ++++++++
> > > >   arch/arm/boot/dts/qcom-apq8084.dtsi                | 103
> > > > ++++++++
> > > >   arch/arm/boot/dts/qcom-msm8974.dtsi                | 103
> > > > ++++++++
> > > >   arch/arm64/boot/dts/qcom/msm8916.dtsi              |  64
> > > > +++++
> > > >   arch/arm64/boot/dts/qcom/msm8996.dtsi              |  92
> > > > +++++++
> > > >   drivers/thermal/Kconfig                            |   5 +
> > > >   drivers/thermal/Makefile                           |   1 +
> > > >   drivers/thermal/qcom/Kconfig                       |  11 +
> > > >   drivers/thermal/qcom/Makefile                      |   2 +
> > > >   drivers/thermal/qcom/tsens-8916.c                  | 113
> > > > ++++++++
> > > >   drivers/thermal/qcom/tsens-8960.c                  | 292
> > > > +++++++++++++++++++++
> > > >   drivers/thermal/qcom/tsens-8974.c                  | 244
> > > > +++++++++++++++++
> > > >   drivers/thermal/qcom/tsens-8996.c                  |  84
> > > > ++++++
> > > >   drivers/thermal/qcom/tsens-common.c                | 141
> > > > ++++++++++
> > > >   drivers/thermal/qcom/tsens.c                       | 200
> > > > ++++++++++++++
> > > >   drivers/thermal/qcom/tsens.h                       |  92
> > > > +++++++
> > > >   drivers/thermal/thermal_core.c                     |  30 +++
> > > >   include/linux/thermal.h                            |   8 +
> > > >   21 files changed, 1739 insertions(+)
> > > >   create mode 100644
> > > > Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> > > >   create mode 100644 drivers/thermal/qcom/Kconfig
> > > >   create mode 100644 drivers/thermal/qcom/Makefile
> > > >   create mode 100644 drivers/thermal/qcom/tsens-8916.c
> > > >   create mode 100644 drivers/thermal/qcom/tsens-8960.c
> > > >   create mode 100644 drivers/thermal/qcom/tsens-8974.c
> > > >   create mode 100644 drivers/thermal/qcom/tsens-8996.c
> > > >   create mode 100644 drivers/thermal/qcom/tsens-common.c
> > > >   create mode 100644 drivers/thermal/qcom/tsens.c
> > > >   create mode 100644 drivers/thermal/qcom/tsens.h
> > > > 



More information about the linux-arm-kernel mailing list