[PATCH v2] arm64: Store breakpoint single step state into pstate

xiakaixu xiakaixu at huawei.com
Thu Jan 21 00:06:21 PST 2016


ping...
于 2016/1/15 16:20, xiakaixu 写道:
> 于 2016/1/13 1:06, Will Deacon 写道:
>> On Tue, Jan 05, 2016 at 01:06:15PM +0800, Wangnan (F) wrote:
>>> On 2016/1/5 0:55, Will Deacon wrote:
>>>> The problem seems to be that we take the debug exception before the
>>>> breakpointed instruction has been executed and call perf_bp_event at
>>>> that moment, so when we single-step the faulting instruction we actually
>>>> step into the SIGIO handler and end up getting stuck.
>>>>
>>>> Your fix doesn't really address this afaict, in that you don't (can't?)
>>>> handle:
>>>>
>>>>   * A longjmp out of a signal handler
>>>>   * A watchpoint and a breakpoint that fire on the same instruction
>>>>   * User-controlled single-step from a signal handler that enables a
>>>>     breakpoint explicitly
>>>>   * Nested signals
>>>
>>> Please have a look at [1], which I improve test__bp_signal() to
>>> check bullet 2 and 4 you mentioned above. Seems my fix is correct.
>>>
>>> [1] http://lkml.kernel.org/g/1451969880-14877-1-git-send-email-wangnan0@huawei.com
>>
>> I'm still really uneasy about this change. Pairing up the signal delivery
>> with the sigreturn to keep track of the debug state is extremely fragile
>> and I'm not keen on adding this logic there. I also think we need to
>> track the address that the breakpoint is originally taken on so that we
>> can only perform the extra sigreturn work if we're returning to the same
>> instruction. Furthermore, I wouldn't want to do this for signals other
>> than those generated directly by a breakpoint.
>>
>> An alternative would be to postpone the signal delivery until after the
>> stepping has been taken care of, but that's a change in ABI and I worry
>> we'll break somebody relying on the current behaviour.
>>
>> What exactly does x86 do? I couldn't figure it out from the code.
> 
> Hi Will,
> 
> I changed the signal SIGIO to SIGUSR2 according to the patch that Wang Nan
> sent out about improving test__bp_signal() to check bullet 2 and 4 you mentioned.
> I tested it with arm64 qemu and gdb. The single instruction execution on qemu
> shows that the result is the same as the processing described in Wang Nan's patch[2].
> 
> I also tested the patch on x86 qemu and found that the result is the same as
> arm64 qemu.
> 
> [1]
>  tools/perf/tests/bp_signal.c |    6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/tools/perf/tests/bp_signal.c b/tools/perf/tests/bp_signal.c
> index 1d1bb48..3046cba 100644
> --- a/tools/perf/tests/bp_signal.c
> +++ b/tools/perf/tests/bp_signal.c
> @@ -175,7 +175,7 @@ int test__bp_signal(int subtest __maybe_unused)
>         sa.sa_sigaction = (void *) sig_handler;
>         sa.sa_flags = SA_SIGINFO;
> 
> -       if (sigaction(SIGIO, &sa, NULL) < 0) {
> +       if (sigaction(SIGUSR2, &sa, NULL) < 0) {
>                 pr_debug("failed setting up signal handler\n");
>                 return TEST_FAIL;
>         }
> @@ -237,9 +237,9 @@ int test__bp_signal(int subtest __maybe_unused)
>          *
>          */
> 
> -       fd1 = bp_event(__test_function, SIGIO);
> +       fd1 = bp_event(__test_function, SIGUSR2);
>         fd2 = bp_event(sig_handler, SIGUSR1);
> -       fd3 = wp_event((void *)&the_var, SIGIO);
> +       fd3 = wp_event((void *)&the_var, SIGUSR2);
>
>         ioctl(fd1, PERF_EVENT_IOC_ENABLE, 0);
>         ioctl(fd2, PERF_EVENT_IOC_ENABLE, 0);
> 
> [2]
>          * Following processing should happen:
>          *   Exec:               Action:                       Result:
>          *   incq (%rdi)       - fd1 event breakpoint hit   -> count1 == 1
>          *                     - SIGIO is delivered
>          *   sig_handler       - fd2 event breakpoint hit   -> count2 == 1
>          *                     - SIGUSR1 is delivered
>          *   sig_handler_2                                  -> overflows_2 == 1  (nested signal)
>          *   sys_rt_sigreturn  - return from sig_handler_2
>          *   overflows++                                    -> overflows = 1
>          *   sys_rt_sigreturn  - return from sig_handler
>          *   incq (%rdi)       - fd3 event watchpoint hit   -> count3 == 1       (wp and bp in one insn)
>          *                     - SIGIO is delivered
>          *   sig_handler       - fd2 event breakpoint hit   -> count2 == 2
>          *                     - SIGUSR1 is delivered
>          *   sig_handler_2                                  -> overflows_2 == 2  (nested signal)
>          *   sys_rt_sigreturn  - return from sig_handler_2
>          *   overflows++                                    -> overflows = 2
>          *   sys_rt_sigreturn  - return from sig_handler
>          *   the_var++         - fd3 event watchpoint hit   -> count3 == 2       (standalone watchpoint)
>          *                     - SIGIO is delivered
>          *   sig_handler       - fd2 event breakpoint hit   -> count2 == 3
>          *                     - SIGUSR1 is delivered
>          *   sig_handler_2                                  -> overflows_2 == 3  (nested signal)
>          *   sys_rt_sigreturn  - return from sig_handler_2
>          *   overflows++                                    -> overflows == 3
>          *   sys_rt_sigreturn  - return from sig_handler
>>
>> Will
>>
>> .
>>
> 
> 


-- 
Regards
Kaixu Xia




More information about the linux-arm-kernel mailing list