[PATCH 1/2] ARM: OMAP1: DMA: Provide dma_slave_map to omap-dma

[Peter Ujfalusi]

On 2016-02-19 23:44, Aaro Koskinen wrote:
> On Tue, Feb 02, 2016 at 04:27:06PM +0200, Peter Ujfalusi wrote:
>> OMAP1 can not boot in DT mode and to be able to clean up the driver
>> regarding to the dmaengine API use (switching to the new API) the
>> device/slave -> filter mapping needs to be provided to the omap-dma driver.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
> 
> Acked-by: Aaro Koskinen <aaro.koskinen at iki.fi>

Thanks Aaro,

I believe the map covers all drivers using DMA, but in case I missed any we -
you ;) will notice it as they will fail to get the DMA channels. This only
going to be visible after I send the driver changes for 4.7. In such a case we
will need to add the given device to the list.

-- 
Péter

> 
> A.
> 
>> ---
>>  arch/arm/mach-omap1/dma.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 45 insertions(+)
>>
>> diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
>> index 7b02ed218a42..f6ba589cd312 100644
>> --- a/arch/arm/mach-omap1/dma.c
>> +++ b/arch/arm/mach-omap1/dma.c
>> @@ -25,6 +25,7 @@
>>  #include <linux/device.h>
>>  #include <linux/io.h>
>>  #include <linux/dma-mapping.h>
>> +#include <linux/dmaengine.h>
>>  #include <linux/omap-dma.h>
>>  #include <mach/tc.h>
>>  
>> @@ -265,6 +266,42 @@ static const struct platform_device_info omap_dma_dev_info = {
>>  	.num_res = 1,
>>  };
>>  
>> +/* OMAP730, OMAP850 */
>> +static const struct dma_slave_map omap7xx_sdma_map[] = {
>> +	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
>> +	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
>> +	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) },
>> +	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) },
>> +	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
>> +	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
>> +	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
>> +	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
>> +	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
>> +	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
>> +	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
>> +	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
>> +};
>> +
>> +/* OMAP1510, OMAP1610*/
>> +static const struct dma_slave_map omap1xxx_sdma_map[] = {
>> +	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
>> +	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
>> +	{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(10) },
>> +	{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(11) },
>> +	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(16) },
>> +	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(17) },
>> +	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
>> +	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
>> +	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
>> +	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
>> +	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
>> +	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
>> +	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
>> +	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
>> +	{ "mmci-omap.1", "tx", SDMA_FILTER_PARAM(54) },
>> +	{ "mmci-omap.1", "rx", SDMA_FILTER_PARAM(55) },
>> +};
>> +
>>  static struct omap_system_dma_plat_info dma_plat_info __initdata = {
>>  	.reg_map	= reg_map,
>>  	.channel_stride	= 0x40,
>> @@ -342,6 +379,14 @@ static int __init omap1_system_dma_init(void)
>>  	p.dma_attr = d;
>>  	p.errata = configure_dma_errata();
>>  
>> +	if (cpu_is_omap7xx()) {
>> +		p.slave_map = omap7xx_sdma_map;
>> +		p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map);
>> +	} else {
>> +		p.slave_map = omap1xxx_sdma_map;
>> +		p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
>> +	}
>> +
>>  	ret = platform_device_add_data(pdev, &p, sizeof(p));
>>  	if (ret) {
>>  		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
>> -- 
>> 2.7.0
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html