[PATCH 0/4] Add support for Engicam IMX6UL module

[Michael Trimarchi]

Thi patch series add the support for Engicam IMXUL product

https://community.freescale.com/docs/DOC-328428

Based on Freescale™ i.MX 6UltraLite processor, a high performance,
ultra-efficient processor family featuring an advanced implementation
of a single ARM™ Cortex™-A7 core, which operates at speeds up to 528 MHz.

The new ENGICAM GEA M6UL module is suitable for cost effective HMI
applications requiring high performance CPU.

Michael Trimarchi (4):
  ARM: dts: imx6ul: Add flexcan1 and flexcan2 support
  ARM: dts: imx6ul: Add LCDIF support
  ARM: dts: imx6ul: Add GPMI nand controller support
  ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support

 arch/arm/boot/dts/Makefile             |   3 +-
 arch/arm/boot/dts/imx6ul-geam-kit.dts  | 102 +++++++++
 arch/arm/boot/dts/imx6ul-geam.dtsi     | 371 +++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/imx6ul.dtsi          |  68 ++++++
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c |  10 +
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h |   6 +-
 6 files changed, 557 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts
 create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi

-- 
2.7.0