[PATCH v3 4/5] ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi

[Krzysztof Adamski]

On Fri, Feb 05, 2016 at 05:46:32PM +0800, Chen-Yu Tsai wrote:
>On Thu, Feb 4, 2016 at 7:33 AM, Krzysztof Adamski <k at japko.eu> wrote:
>> Add the corresponding device node for R_PIO on H3 to the dtsi. Support
>> for the controller was added in earlier commit.
>>
>> Signed-off-by: Krzysztof Adamski <k at japko.eu>
>> ---
>>  arch/arm/boot/dts/sun8i-h3.dtsi | 12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
>> index bb37f52..f618a95 100644
>> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
>> @@ -517,5 +517,17 @@
>>                         compatible = "allwinner,sun6i-a31-clock-reset";
>>                         #reset-cells = <1>;
>>                 };
>> +
>> +               r_pio: pinctrl at 01f02c00 {
>> +                       compatible = "allwinner,sun8i-h3-r-pinctrl";
>> +                       reg = <0x01f02c00 0x400>;
>> +                       interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>> +                       clocks = <&apb0_gates 0>;
>> +                       resets = <&apb0_reset 0>;
>> +                       gpio-controller;
>> +                       #gpio-cells = <3>;
>> +                       interrupt-controller;
>> +                       #interrupt-cells = <2>;
>
>This should be 3: bank number + pin number + flags.
>The rest looks good.

Nicly spotted. I took it from pio description in the same file. So 
there's a bug there too.