[PATCH v3 1/4] iio: adc: rockchip_saradc: reset saradc controller before programming it

Jonathan Cameron jic23 at kernel.org
Sun Aug 21 13:01:19 PDT 2016


Something in here got it blocked by the lists. I'm guessing it
was the characters my email client didn't like so trying again
with them dropped.

Jonathan
On 21/08/16 20:11, Jonathan Cameron wrote:
> On 15/08/16 19:10, Caesar Wang wrote:
>>
>>> On 27/07/16 15:24, Caesar Wang wrote:
>>>> SARADC controller needs to be reset before programming it, otherwise
>>>> it will not function properly.
>>>>
>>>> Signed-off-by: Caesar Wang <wxt at rock-chips.com>
>>>> Cc: Jonathan Cameron <jic23 at kernel.org>
>>>> Cc: Heiko Stuebner <heiko at sntech.de>
>>>> Cc: Rob Herring <robh+dt at kernel.org>
>>>> Cc: linux-iio at vger.kernel.org
>>>> Cc: linux-rockchip at lists.infradead.org
>>>> Tested-by: Guenter Roeck <linux at roeck-us.net>
>>>>
>>> Hi
>>>
>>> Patch is fine (I'll fix up the wording issue) however...
>>>
>>> I'm not clear on the severity of the issue. Is this something
>>> we should be pushing for stable?
>>
>> I think that should be pushing for stable, since the common isssue for the ADC is initially enabled on loader,
>> and only disabled after the first read.
>>
>> cat /sys/class/hwmon/hwmon1/device/temp1_input
>> cat: /sys/class/hwmon/hwmon1/device/temp1_input: Connection timed out
>>
>> The kernel log shows:
>>
>> [ 32.209451] read channel() error: -110
>> ..
>>
>> Also, for my experience. Some other reasons caused the adc (controller) glitch for the kernel side.
> Fine.  So now the only question is who is handling it. The
> fix is useless (I think) without the dts changes to support it.
> Normally we'd route the dts and driver changes separately as it
> should not matter, but here I think I'd prefer it if the whole
> thing went via rockchip -> arm-soc tree so it goes in together.
> 
> Hence (with wording fixed)
> 
> Acked-by: Jonathan Cameron <jic23 at kernel.org>
> Cc: <Stable at vger.kernel.org> 
> (for the driver patch).
> 
> If people want me to take it via IIO then I'll need acks for
> the dts changes with explicit agreement that they can be marked
> for stable. Would image Heiko, these would come from you.
> 
> Thanks,
> 
> Jonathan
>>
>> -
>> Caesar
>>
>>> Jonathan
>>>> ---
>>>>
>>>> Changes in v3:
>>>> - %s/devm_reset_control_get_optional()/devm_reset_control_get()
>>>> - add Guente's test tag.
>>>>
>>>> Changes in v2:
>>>> - Make the reset as an optional property, since it should work
>>>> with old devicetrees as well.
>>>>
>>>>  .../bindings/iio/adc/rockchip-saradc.txt           |  7 +++++
>>>>  drivers/iio/adc/Kconfig                            |  1 +
>>>>  drivers/iio/adc/rockchip_saradc.c                  | 30 ++++++++++++++++++++++
>>>>  3 files changed, 38 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
>>>> index bf99e2f..205593f 100644
>>>> --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
>>>> +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
>>>> @@ -16,6 +16,11 @@ Required properties:
>>>>  - vref-supply: The regulator supply ADC reference voltage.
>>>>  - #io-channel-cells: Should be 1, see ../iio-bindings.txt
>>>>  
>>>> +Optional properties:
>>>> +- resets: Must contain an entry for each entry in reset-names if need support
>>>> +	  this option. See ../reset/reset.txt for details.
>>>> +- reset-names: Must include the name "saradc-apb".
>>>> +
>>>>  Example:
>>>>  	saradc: saradc at 2006c000 {
>>>>  		compatible = "rockchip,saradc";
>>>> @@ -23,6 +28,8 @@ Example:
>>>>  		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
>>>>  		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
>>>>  		clock-names = "saradc", "apb_pclk";
>>>> +		resets = <&cru SRST_SARADC>;
>>>> +		reset-names = "saradc-apb";
>>>>  		#io-channel-cells = <1>;
>>>>  		vref-supply = <&vcc18>;
>>>>  	};
>>>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>>>> index 1de31bd..7675772 100644
>>>> --- a/drivers/iio/adc/Kconfig
>>>> +++ b/drivers/iio/adc/Kconfig
>>>> @@ -389,6 +389,7 @@ config QCOM_SPMI_VADC
>>>>  config ROCKCHIP_SARADC
>>>>  	tristate "Rockchip SARADC driver"
>>>>  	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
>>>> +	depends on RESET_CONTROLLER
>>>>  	help
>>>>  	  Say yes here to build support for the SARADC found in SoCs from
>>>>  	  Rockchip.
>>>> diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
>>>> index f9ad6c2..85d7012 100644
>>>> --- a/drivers/iio/adc/rockchip_saradc.c
>>>> +++ b/drivers/iio/adc/rockchip_saradc.c
>>>> @@ -21,6 +21,8 @@
>>>>  #include <linux/of_device.h>
>>>>  #include <linux/clk.h>
>>>>  #include <linux/completion.h>
>>>> +#include <linux/delay.h>
>>>> +#include <linux/reset.h>
>>>>  #include <linux/regulator/consumer.h>
>>>>  #include <linux/iio/iio.h>
>>>>  
>>>> @@ -53,6 +55,7 @@ struct rockchip_saradc {
>>>>  	struct clk		*clk;
>>>>  	struct completion	completion;
>>>>  	struct regulator	*vref;
>>>> +	struct reset_control	*reset;
>>>>  	const struct rockchip_saradc_data *data;
>>>>  	u16			last_val;
>>>>  };
>>>> @@ -190,6 +193,16 @@ static const struct of_device_id rockchip_saradc_match[] = {
>>>>  };
>>>>  MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
>>>>  
>>>> +/**
>>>> + * Reset SARADC Controller.
>>>> + */
>>>> +static void rockchip_saradc_reset_controller(struct reset_control *reset)
>>>> +{
>>>> +	reset_control_assert(reset);
>>>> +	usleep_range(10, 20);
>>>> +	reset_control_deassert(reset);
>>>> +}
>>>> +
>>>>  static int rockchip_saradc_probe(struct platform_device *pdev)
>>>>  {
>>>>  	struct rockchip_saradc *info = NULL;
>>>> @@ -218,6 +231,20 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
>>>>  	if (IS_ERR(info->regs))
>>>>  		return PTR_ERR(info->regs);
>>>>  
>>>> +	/*
>>>> +	 * The reset should be an optional property, as it should work
>>>> +	 * with old devicetrees as well
>>>> +	 */
>>>> +	info->reset = devm_reset_control_get(&pdev->dev, "saradc-apb");
>>>> +	if (IS_ERR(info->reset)) {
>>>> +		ret = PTR_ERR(info->reset);
>>>> +		if (ret != -ENOENT)
>>>> +			return ret;
>>>> +
>>>> +		dev_dbg(&pdev->dev, "no reset control found\n");
>>>> +		info->reset = NULL;
>>>> +	}
>>>> +
>>>>  	init_completion(&info->completion);
>>>>  
>>>>  	irq = platform_get_irq(pdev, 0);
>>>> @@ -252,6 +279,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
>>>>  		return PTR_ERR(info->vref);
>>>>  	}
>>>>  
>>>> +	if (info->reset)
>>>> +		rockchip_saradc_reset_controller(info->reset);
>>>> +
>>>>  	/*
>>>>  	 * Use a default value for the converter clock.
>>>>  	 * This may become user-configurable in the future.
>>>>
>>>
>>> _______________________________________________
>>> Linux-rockchip mailing list
>>> Linux-rockchip at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>>
>>
>> -- 
>> caesar wang | software engineer | wxt at rock-chip.com 
>>
> 




More information about the linux-arm-kernel mailing list