[PATCH 0/2] arm64: hisilicon: add support hip06 d03 board

[Wei Xu]

Hi Kefeng,

On 08/04/2016 08:27, Kefeng Wang wrote:
> Add initial dts for Hip06 D03 board and documentation.
> 
> The Hip06 soc has same cpu topology compared with Hip05, four clusters
> and each cluster has quard Cortex-A57, but with different IO part,
> like HNS, SAS and PCI, they are all upgraded. There are also not same
> in ITS, MBIGEN and SMMU, etc.
> 
> Note, there is no serial, because the soc use LPC uart, the serial node
> is not needed.
> 
> Kefeng Wang (2):
>   arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
>   Documentation: arm64: Add Hisilicon Hip06 D03 dts binding
> 
>  .../bindings/arm/hisilicon/hisilicon.txt           |  20 +-
>  arch/arm64/boot/dts/hisilicon/Makefile             |   4 +-
>  arch/arm64/boot/dts/hisilicon/hip06-d03.dts        |  34 +++
>  arch/arm64/boot/dts/hisilicon/hip06.dtsi           | 307 +++++++++++++++++++++
>  4 files changed, 356 insertions(+), 9 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/hisilicon/hip06-d03.dts
>  create mode 100644 arch/arm64/boot/dts/hisilicon/hip06.dtsi
> 

Thanks!
Applied both to the hisilicon soc tree.

Best Regards,
Wei