[PATCH v2] gpmi-nand: Handle ECC Errors in erased pages

Boris Brezillon boris.brezillon at free-electrons.com
Tue Apr 26 10:30:02 PDT 2016


On Mon, 25 Apr 2016 14:35:12 +0200
Markus Pargmann <mpa at pengutronix.de> wrote:

> ECC is only calculated for written pages. As erased pages are not
> actively written the ECC is always invalid. For this purpose the
> Hardware BCH unit is able to check for erased pages and does not raise
> an ECC error in this case. This behaviour can be influenced using the
> BCH_MODE register which sets the number of allowed bitflips in an erased
> page. Unfortunately the unit is not capable of fixing the bitflips in
> memory.
> 
> To avoid complete software checks for erased pages, we can simply check
> buffers with uncorrectable ECC errors because we know that any erased
> page with errors is uncorrectable by the BCH unit.
> 
> This patch adds the generic nand_check_erased_ecc_chunk() to gpmi-nand
> to correct erased pages. To have the valid data in the buffer before
> using them, this patch moves the read_page_swap_end() call before the
> ECC status checking for-loop.
> 
> Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
> [Squashed patches by Stefan and Boris to check ECC area]
> Cc: Stefan Christ <s.christ at phytec.de>
> Cc: Boris Brezillon <boris.brezillon at free-electrons.com>
> 
> Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
> ---

Applied, thanks.

Boris
-- 
Boris Brezillon, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com



More information about the linux-arm-kernel mailing list