[RESEND][PATCH 3/3] arm64: dts: mt8173: Add dynamic power node.

Matthias Brugger matthias.bgg at gmail.com
Thu Apr 21 03:28:28 PDT 2016



On 21/04/16 06:12, dawei chien wrote:
> On Tue, 2016-03-15 at 16:10 +0800, Dawei Chien (錢大衛) wrote:
>> This device node is for calculating dynamic power in mW.
>> Since mt8173 has two clusters, there are two dynamic power
>> coefficient as well.
>>
>> Signed-off-by: Dawei Chien <dawei.chien at mediatek.com>
>> ---
>> This patch is base on patchset:
>> https://lkml.org/lkml/2015/11/17/251
>
> Sorry for miss one dependence for this device node.
> https://lkml.org/lkml/2015/7/9/206
>

This patch got somehow forgotten.
Thanks for the reminder.
Matthias

>> ---
>>   arch/arm64/boot/dts/mediatek/mt8173.dtsi |    4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> index f9c44cc..5cb6b4e 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> @@ -71,6 +71,7 @@
>>                          #cooling-cells = <2>;
>>                          #cooling-min-level = <0>;
>>                          #cooling-max-level = <7>;
>> +                       dynamic-power-coefficient = <263>;
>>                  };
>>
>>                  cpu1: cpu at 1 {
>> @@ -95,6 +96,7 @@
>>                          #cooling-cells = <2>;
>>                          #cooling-min-level = <0>;
>>                          #cooling-max-level = <7>;
>> +                       dynamic-power-coefficient = <263>;
>>                  };
>>
>>                  cpu2: cpu at 100 {
>> @@ -119,6 +121,7 @@
>>                          #cooling-cells = <2>;
>>                          #cooling-min-level = <0>;
>>                          #cooling-max-level = <7>;
>> +                       dynamic-power-coefficient = <530>;
>>                  };
>>
>>                  cpu3: cpu at 101 {
>> @@ -143,6 +146,7 @@
>>                          #cooling-cells = <2>;
>>                          #cooling-min-level = <0>;
>>                          #cooling-max-level = <7>;
>> +                       dynamic-power-coefficient = <530>;
>>                  };
>>
>>                  idle-states {
>> --
>> 1.7.9.5
>>
>
>



More information about the linux-arm-kernel mailing list