[PATCH 8/9] mtd: fsl-quadspi: disable AHB buffer prefetch

Han Xu han.xu at nxp.com
Wed Apr 20 15:37:21 PDT 2016



________________________________________
From: Yunhui Cui <B56489 at freescale.com>
Sent: Wednesday, April 13, 2016 9:50 PM
To: dwmw2 at infradead.org; computersforpeace at gmail.com; han.xu at freescale.com
Cc: linux-kernel at vger.kernel.org; linux-mtd at lists.infradead.org; linux-arm-kernel at lists.infradead.org; Yao Yuan; Yunhui Cui
Subject: [PATCH 8/9] mtd: fsl-quadspi: disable AHB buffer prefetch

From: Yunhui Cui <yunhui.cui at nxp.com>

A-009282: QuadSPI: QuadSPI data pre-fetch can result in incorrect data
Affects: QuadSPI
Description: With AHB buffer prefetch enabled, the QuadSPI may return
incorrect data on the AHB
interface. The buffer pre-fetch is enabled if the fetch size as
configured either in the LUT or in
the BUFxCR register is greater than 8 bytes.
Impact: Only 64 bit read allowed.
Workaround: Keep the read data size to 64 bits (8 Bytes), which disables
the prefetch on the AHB buffer,
and prevents this issue from occurring.

Signed-off-by: Yunhui Cui <yunhui.cui at nxp.com>
---
 drivers/mtd/spi-nor/fsl-quadspi.c | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index fea18b6..d9f3e50 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -752,19 +752,36 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
 {
        void __iomem *base = q->iobase;
        int seqid;
+       const struct fsl_qspi_devtype_data *devtype_data = q->devtype_data;

        /* AHB configuration for access buffer 0/1/2 .*/
        qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
        qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
        qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
+
        /*
-        * Set ADATSZ with the maximum AHB buffer size to improve the
-        * read performance.
+        * Errata: A-009282: QuadSPI data prefetch may result in incorrect data
+        * Workaround: Keep the read data size to 64 bits (8 bytes).
+        * This disables the prefetch on the AHB buffer and
+        * prevents this issue from occurring.
         */
-       qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
-                       ((q->devtype_data->ahb_buf_size / 8)
-                       << QUADSPI_BUF3CR_ADATSZ_SHIFT),
-                       base + QUADSPI_BUF3CR);
+       if (devtype_data->devtype == FSL_QUADSPI_LS2080A ||
+           devtype_data->devtype == FSL_QUADSPI_LS1021A) {

Use QUIRK, not SoC name.
+
+               qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
+                               (1 << QUADSPI_BUF3CR_ADATSZ_SHIFT),
+                               base + QUADSPI_BUF3CR);
+
+       } else {
+               /*
+                * Set ADATSZ with the maximum AHB buffer size to improve the
+                * read performance.
+               */
+               qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
+                               ((q->devtype_data->ahb_buf_size / 8)
+                               << QUADSPI_BUF3CR_ADATSZ_SHIFT),
+                               base + QUADSPI_BUF3CR);
+       }

        /* We only use the buffer3 */
        qspi_writel(q, 0, base + QUADSPI_BUF0IND);
--
2.1.0.27.g96db324




More information about the linux-arm-kernel mailing list