[PATCH net-next V3 01/16] net: fec: only check queue 0 if RXF_0/TXF_0 interrupt is set

[Troy Kisky]

Before queue 0 was always checked if any queue caused an interrupt.
It is better to just mark queue 0 if queue 0 has caused an interrupt.

Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
Acked-by: Fugang Duan <Fugang.duan at nxp.com>

---
v3: add Acked-by
---
 drivers/net/ethernet/freescale/fec_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 08243c2..a011719 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1534,14 +1534,14 @@ fec_enet_collect_events(struct fec_enet_private *fep, uint int_events)
 	if (int_events == 0)
 		return false;
 
-	if (int_events & FEC_ENET_RXF)
+	if (int_events & FEC_ENET_RXF_0)
 		fep->work_rx |= (1 << 2);
 	if (int_events & FEC_ENET_RXF_1)
 		fep->work_rx |= (1 << 0);
 	if (int_events & FEC_ENET_RXF_2)
 		fep->work_rx |= (1 << 1);
 
-	if (int_events & FEC_ENET_TXF)
+	if (int_events & FEC_ENET_TXF_0)
 		fep->work_tx |= (1 << 2);
 	if (int_events & FEC_ENET_TXF_1)
 		fep->work_tx |= (1 << 0);
-- 
2.5.0