[PATCH 1/2] clocksource: sp804: Add support for OX810SE 24bit timer width
Neil Armstrong
narmstrong at baylibre.com
Fri Apr 1 07:22:38 PDT 2016
In order to support the Dual-Timer on the Oxford Semiconductor OX810SE SoC,
implement variable counter width, keeping 32bit as default width.
Add new compatible string oxsemi,ox810se-rps-timer in order to select
the 24bit counter width.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
drivers/clocksource/timer-sp804.c | 107 ++++++++++++++++++++++++--------------
include/clocksource/timer-sp804.h | 42 ++++++++++++---
2 files changed, 102 insertions(+), 47 deletions(-)
diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index 5f45b9a..e99269a 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -77,15 +77,15 @@ void __init sp804_timer_disable(void __iomem *base)
writel(0, base + TIMER_CTRL);
}
-void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
- const char *name,
- struct clk *clk,
- int use_sched_clock)
+void __init __sp804_clocksource_and_sched_clock_init(struct timer_sp804 *sp804,
+ bool use_sched_clock)
{
long rate;
+ u32 config = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
+ struct clk *clk = sp804->clocksource_clk;
if (!clk) {
- clk = clk_get_sys("sp804", name);
+ clk = clk_get_sys("sp804", sp804->name);
if (IS_ERR(clk)) {
pr_err("sp804: clock not found: %d\n",
(int)PTR_ERR(clk));
@@ -98,19 +98,22 @@ void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
if (rate < 0)
return;
+ if (sp804->width == 32)
+ config |= TIMER_CTRL_32BIT;
+
/* setup timer 0 as free-running clocksource */
- writel(0, base + TIMER_CTRL);
- writel(0xffffffff, base + TIMER_LOAD);
- writel(0xffffffff, base + TIMER_VALUE);
- writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
- base + TIMER_CTRL);
+ writel(0, sp804->clocksource_base + TIMER_CTRL);
+ writel(0xffffffff, sp804->clocksource_base + TIMER_LOAD);
+ writel(0xffffffff, sp804->clocksource_base + TIMER_VALUE);
+ writel(config, sp804->clocksource_base + TIMER_CTRL);
- clocksource_mmio_init(base + TIMER_VALUE, name,
- rate, 200, 32, clocksource_mmio_readl_down);
+ clocksource_mmio_init(sp804->clocksource_base + TIMER_VALUE,
+ sp804->name, rate, 200, sp804->width,
+ clocksource_mmio_readl_down);
if (use_sched_clock) {
- sched_clock_base = base;
- sched_clock_register(sp804_read, 32, rate);
+ sched_clock_base = sp804->clocksource_base;
+ sched_clock_register(sp804_read, sp804->width, rate);
}
}
@@ -186,15 +189,16 @@ static struct irqaction sp804_timer_irq = {
.dev_id = &sp804_clockevent,
};
-void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
+void __init __sp804_clockevents_init(struct timer_sp804 *sp804)
{
struct clock_event_device *evt = &sp804_clockevent;
long rate;
+ struct clk *clk = sp804->clockevent_clk;
if (!clk)
- clk = clk_get_sys("sp804", name);
+ clk = clk_get_sys("sp804", sp804->name);
if (IS_ERR(clk)) {
- pr_err("sp804: %s clock not found: %d\n", name,
+ pr_err("sp804: %s clock not found: %d\n", sp804->name,
(int)PTR_ERR(clk));
return;
}
@@ -203,26 +207,27 @@ void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struc
if (rate < 0)
return;
- clkevt_base = base;
+ clkevt_base = sp804->clockevent_base;
clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
- evt->name = name;
- evt->irq = irq;
+ evt->name = sp804->name;
+ evt->irq = sp804->irq;
evt->cpumask = cpu_possible_mask;
- writel(0, base + TIMER_CTRL);
+ writel(0, sp804->clockevent_base + TIMER_CTRL);
- setup_irq(irq, &sp804_timer_irq);
- clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
+ setup_irq(sp804->irq, &sp804_timer_irq);
+ clockevents_config_and_register(evt, rate, 0xf,
+ GENMASK(sp804->width-1, 0));
}
static void __init sp804_of_init(struct device_node *np)
{
static bool initialized = false;
+ struct timer_sp804 sp804;
void __iomem *base;
- int irq;
u32 irq_num = 0;
struct clk *clk1, *clk2;
- const char *name = of_get_property(np, "compatible", NULL);
+ u32 width = 32;
base = of_iomap(np, 0);
if (WARN_ON(!base))
@@ -250,19 +255,33 @@ static void __init sp804_of_init(struct device_node *np)
} else
clk2 = clk1;
- irq = irq_of_parse_and_map(np, 0);
- if (irq <= 0)
+ sp804.irq = irq_of_parse_and_map(np, 0);
+ if (sp804.irq <= 0)
goto err;
+ /* OX810SE Uses a special 24bit width */
+ if (of_device_is_compatible(np, "oxsemi,ox810se-rps-timer"))
+ width = 24;
+
of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
if (irq_num == 2) {
- __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
- __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+ sp804.clockevent_base = base + TIMER_2_BASE;
+ sp804.clocksource_base = base;
+ sp804.clockevent_clk = clk2;
+ sp804.clocksource_clk = clk1;
} else {
- __sp804_clockevents_init(base, irq, clk1 , name);
- __sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
- name, clk2, 1);
+ sp804.clockevent_base = base;
+ sp804.clocksource_base = base + TIMER_2_BASE;
+ sp804.clockevent_clk = clk1;
+ sp804.clocksource_clk = clk2;
}
+
+ sp804.name = of_get_property(np, "compatible", NULL);
+ sp804.width = width;
+
+ __sp804_clockevents_init(&sp804);
+ __sp804_clocksource_and_sched_clock_init(&sp804, true);
+
initialized = true;
return;
@@ -270,13 +289,13 @@ err:
iounmap(base);
}
CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
+CLOCKSOURCE_OF_DECLARE(ox810se, "oxsemi,ox810se-rps-timer", sp804_of_init);
static void __init integrator_cp_of_init(struct device_node *np)
{
static int init_count = 0;
+ struct timer_sp804 sp804;
void __iomem *base;
- int irq;
- const char *name = of_get_property(np, "compatible", NULL);
struct clk *clk;
base = of_iomap(np, 0);
@@ -292,14 +311,22 @@ static void __init integrator_cp_of_init(struct device_node *np)
if (init_count == 2 || !of_device_is_available(np))
goto err;
- if (!init_count)
- __sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
- else {
- irq = irq_of_parse_and_map(np, 0);
- if (irq <= 0)
+ sp804.name = of_get_property(np, "compatible", NULL);
+ sp804.width = 32;
+
+ if (!init_count) {
+ sp804.clocksource_base = base;
+ sp804.clocksource_clk = clk;
+
+ __sp804_clocksource_and_sched_clock_init(&sp804, false);
+ } else {
+ sp804.clockevent_base = base;
+ sp804.clockevent_clk = clk;
+ sp804.irq = irq_of_parse_and_map(np, 0);
+ if (sp804.irq <= 0)
goto err;
- __sp804_clockevents_init(base, irq, clk, name);
+ __sp804_clockevents_init(&sp804);
}
init_count++;
diff --git a/include/clocksource/timer-sp804.h b/include/clocksource/timer-sp804.h
index 1f8a1ca..928091b 100644
--- a/include/clocksource/timer-sp804.h
+++ b/include/clocksource/timer-sp804.h
@@ -3,26 +3,54 @@
struct clk;
-void __sp804_clocksource_and_sched_clock_init(void __iomem *,
- const char *, struct clk *, int);
-void __sp804_clockevents_init(void __iomem *, unsigned int,
- struct clk *, const char *);
+struct timer_sp804 {
+ void __iomem *clockevent_base;
+ void __iomem *clocksource_base;
+ const char *name;
+ struct clk *clockevent_clk;
+ struct clk *clocksource_clk;
+ unsigned int irq;
+ unsigned int width;
+};
+
+void __sp804_clocksource_and_sched_clock_init(struct timer_sp804 *sp804, bool);
+void __sp804_clockevents_init(struct timer_sp804 *sp804);
void sp804_timer_disable(void __iomem *);
static inline void sp804_clocksource_init(void __iomem *base, const char *name)
{
- __sp804_clocksource_and_sched_clock_init(base, name, NULL, 0);
+ struct timer_sp804 sp804 = {
+ .clocksource_base = base,
+ .name = name,
+ .clocksource_clk = NULL,
+ .width = 32,
+ };
+
+ __sp804_clocksource_and_sched_clock_init(&sp804, false);
}
static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base,
const char *name)
{
- __sp804_clocksource_and_sched_clock_init(base, name, NULL, 1);
+ struct timer_sp804 sp804 = {
+ .clocksource_base = base,
+ .name = name,
+ .clocksource_clk = NULL,
+ .width = 32,
+ };
+
+ __sp804_clocksource_and_sched_clock_init(&sp804, true);
}
static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq, const char *name)
{
- __sp804_clockevents_init(base, irq, NULL, name);
+ struct timer_sp804 sp804 = {
+ .clockevent_base = base,
+ .name = name,
+ .clockevent_clk = NULL,
+ .width = 32,
+ };
+ __sp804_clockevents_init(&sp804);
}
#endif
--
1.9.1
More information about the linux-arm-kernel
mailing list