[PATCH v3 2/2] power: reset: at91-shdwc: add new shutdown controller driver

[kbuild test robot]

Hi Nicolas,

[auto build test results on v4.3-rc3 -- if it's inappropriate base, please ignore]

config: x86_64-allmodconfig (attached as .config)
reproduce:
  git checkout c2df3a7df512b1d640247d7c9b7542217bfb9ab1
  # save the attached .config to linux build tree
  make ARCH=x86_64 

All warnings (new ones prefixed by >>):

   drivers/power/reset/at91-shdwc.c: In function 'at91_poweroff':
>> drivers/power/reset/at91-shdwc.c:32:24: warning: large integer implicitly truncated to unsigned type [-Woverflow]
    #define AT91_SHDW_KEY  (0xa5 << 24)  /* KEY Password */
                           ^
>> drivers/power/reset/at91-shdwc.c:107:9: note: in expansion of macro 'AT91_SHDW_KEY'
     writel(AT91_SHDW_KEY | AT91_SHDW_SHDW,
            ^

vim +32 drivers/power/reset/at91-shdwc.c

    26	#include <linux/printk.h>
    27	
    28	#define SLOW_CLOCK_FREQ	32768
    29	
    30	#define AT91_SHDW_CR	0x00		/* Shut Down Control Register */
    31	#define AT91_SHDW_SHDW		BIT(0)			/* Shut Down command */
  > 32	#define AT91_SHDW_KEY		(0xa5 << 24)		/* KEY Password */
    33	
    34	#define AT91_SHDW_MR	0x04		/* Shut Down Mode Register */
    35	#define AT91_SHDW_WKUPDBC_SHIFT	24
    36	#define AT91_SHDW_WKUPDBC_MASK	GENMASK(31, 16)
    37	#define AT91_SHDW_WKUPDBC(x)	(((x) << AT91_SHDW_WKUPDBC_SHIFT) \
    38							& AT91_SHDW_WKUPDBC_MASK)
    39	
    40	#define AT91_SHDW_SR	0x08		/* Shut Down Status Register */
    41	#define AT91_SHDW_WKUPIS_SHIFT	16
    42	#define AT91_SHDW_WKUPIS_MASK	GENMASK(31, 16)
    43	#define AT91_SHDW_WKUPIS(x)	((1 << (x)) << AT91_SHDW_WKUPIS_SHIFT \
    44							& AT91_SHDW_WKUPIS_MASK)
    45	
    46	#define AT91_SHDW_WUIR	0x0c		/* Shutdown Wake-up Inputs Register */
    47	#define AT91_SHDW_WKUPEN_MASK	GENMASK(15, 0)
    48	#define AT91_SHDW_WKUPEN(x)	((1 << (x)) & AT91_SHDW_WKUPEN_MASK)
    49	#define AT91_SHDW_WKUPT_SHIFT	16
    50	#define AT91_SHDW_WKUPT_MASK	GENMASK(31, 16)
    51	#define AT91_SHDW_WKUPT(x)	((1 << (x)) << AT91_SHDW_WKUPT_SHIFT \
    52							& AT91_SHDW_WKUPT_MASK)
    53	
    54	#define SHDW_WK_PIN(reg, cfg)	((reg) & AT91_SHDW_WKUPIS((cfg)->wkup_pin_input))
    55	#define SHDW_RTCWK(reg, cfg)	(((reg) >> ((cfg)->sr_rtcwk_shift)) & 0x1)
    56	#define SHDW_RTCWKEN(cfg)	(1 << ((cfg)->mr_rtcwk_shift))
    57	
    58	#define DBC_PERIOD_US(x)	DIV_ROUND_UP_ULL((1000000 * (x)), \
    59								SLOW_CLOCK_FREQ)
    60	
    61	struct shdwc_config {
    62		u8 wkup_pin_input;
    63		u8 mr_rtcwk_shift;
    64		u8 sr_rtcwk_shift;
    65	};
    66	
    67	struct shdwc {
    68		struct shdwc_config *cfg;
    69		void __iomem *at91_shdwc_base;
    70	};
    71	
    72	/*
    73	 * Hold configuration here, cannot be more than one instance of the driver
    74	 * since pm_power_off itself is global.
    75	 */
    76	static struct shdwc *at91_shdwc;
    77	static struct clk *sclk;
    78	
    79	static const unsigned long long sdwc_dbc_period[] = {
    80		0, 3, 32, 512, 4096, 32768,
    81	};
    82	
    83	static void __init at91_wakeup_status(struct platform_device *pdev)
    84	{
    85		struct shdwc *shdw = platform_get_drvdata(pdev);
    86		u32 reg;
    87		char *reason = "unknown";
    88	
    89		reg = readl(shdw->at91_shdwc_base + AT91_SHDW_SR);
    90	
    91		dev_dbg(&pdev->dev, "%s: status = %#x\n", __func__, reg);
    92	
    93		/* Simple power-on, just bail out */
    94		if (!reg)
    95			return;
    96	
    97		if (SHDW_WK_PIN(reg, shdw->cfg))
    98			reason = "WKUP pin";
    99		else if (SHDW_RTCWK(reg, shdw->cfg))
   100			reason = "RTC";
   101	
   102		pr_info("AT91: Wake-Up source: %s\n", reason);
   103	}
   104	
   105	static void at91_poweroff(void)
   106	{
 > 107		writel(AT91_SHDW_KEY | AT91_SHDW_SHDW,
   108				at91_shdwc->at91_shdwc_base + AT91_SHDW_CR);
   109	}
   110	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 50064 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151001/6e4e7502/attachment-0001.obj>