[PATCH v5 05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range

Krzysztof Kozlowski k.kozlowski at samsung.com
Tue Sep 29 22:32:04 PDT 2015


On 22.09.2015 16:37, Yakir Yang wrote:
> Both hsync/vsync polarity and interlace mode can be parsed from
> drm display mode, and dynamic_range and ycbcr_coeff can be judge
> by the video code.
> 
> But presumably Exynos still relies on the DT properties, so take
> good use of mode_fixup() in to achieve the compatibility hacks.
> 
> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
> ---
> Changes in v5:
> - Switch video timing type to "u32", so driver could use "of_property_read_u32"
>   to get the backword timing values. 

Okay

> Krzysztof suggest me that driver could use
>   the "of_property_read_bool" to get backword timing values, but that interfacs
>   would modify the original drm_display_mode timing directly (whether those
>   properties exists or not).

Hmm, I don't understand. You have a:
	struct video_info {
		bool h_sync_polarity;
		bool v_sync_polarity;
		bool interlaced;
	};

so what is wrong with:
	dp_video_config->h_sync_polarity =
		of_property_read_bool(dp_node, "hsync-active-high");

Is it exactly the same binding as previously?

Best regards,
Krzysztof

> 
> Changes in v4:
> - Provide backword compatibility with samsung. (Krzysztof)
> 
> Changes in v3:
> - Dynamic parse video timing info from struct drm_display_mode and
>   struct drm_display_info. (Thierry)
> 
> Changes in v2: None
> 
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 144 +++++++++++++--------
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |   8 +-
>  drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  |  14 +-
>  3 files changed, 104 insertions(+), 62 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 1e3c8d3..6be139b 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -890,8 +890,8 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
>  		return;
>  	}
>  
> -	ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
> -					 dp->video_info->link_rate);
> +	ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
> +					 dp->video_info.link_rate);
>  	if (ret) {
>  		dev_err(dp->dev, "unable to do link train\n");
>  		return;
> @@ -1030,6 +1030,85 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
>  	dp->dpms_mode = DRM_MODE_DPMS_OFF;
>  }
>  
> +static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
> +					struct drm_display_mode *orig_mode,
> +					struct drm_display_mode *mode)
> +{
> +	struct analogix_dp_device *dp = bridge->driver_private;
> +	struct drm_display_info *display_info = &dp->connector->display_info;
> +	struct video_info *video = &dp->video_info;
> +	struct device_node *dp_node = dp->dev->of_node;
> +	int vic;
> +
> +	/* Input video interlaces & hsync pol & vsync pol */
> +	video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
> +	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
> +	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
> +
> +	/* Input video dynamic_range & colorimetry */
> +	vic = drm_match_cea_mode(mode);
> +	if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) ||
> +	    (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) {
> +		video->dynamic_range = CEA;
> +		video->ycbcr_coeff = COLOR_YCBCR601;
> +	} else if (vic) {
> +		video->dynamic_range = CEA;
> +		video->ycbcr_coeff = COLOR_YCBCR709;
> +	} else {
> +		video->dynamic_range = VESA;
> +		video->ycbcr_coeff = COLOR_YCBCR709;
> +	}
> +
> +	/* Input vide bpc and color_formats */
> +	switch (display_info->bpc) {
> +	case 12:
> +		video->color_depth = COLOR_12;
> +		break;
> +	case 10:
> +		video->color_depth = COLOR_10;
> +		break;
> +	case 8:
> +		video->color_depth = COLOR_8;
> +		break;
> +	case 6:
> +		video->color_depth = COLOR_6;
> +		break;
> +	default:
> +		video->color_depth = COLOR_8;
> +		break;
> +	}
> +	if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
> +		video->color_space = COLOR_YCBCR444;
> +	else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
> +		video->color_space = COLOR_YCBCR422;
> +	else if (display_info->color_formats & DRM_COLOR_FORMAT_RGB444)
> +		video->color_space = COLOR_RGB;
> +	else
> +		video->color_space = COLOR_RGB;
> +
> +	/*
> +	 * NOTE: those property parsing code is used for providing backward
> +	 * compatibility for samsung platform.
> +	 * Due to we used the "of_property_read_u32" interfaces, when this
> +	 * property isn't present, the "video_info" can keep the original
> +	 * values and wouldn't be modified.
> +	 */
> +	of_property_read_u32(dp_node, "samsung,color-space",
> +			     &video->color_space);
> +	of_property_read_u32(dp_node, "samsung,dynamic-range",
> +			     &video->dynamic_range);
> +	of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
> +			     &video->ycbcr_coeff);
> +	of_property_read_u32(dp_node, "samsung,color-depth",
> +			     &video->color_depth);
> +	of_property_read_u32(dp_node, "hsync-active-high",
> +			     &video->h_sync_polarity);
> +	of_property_read_u32(dp_node, "vsync-active-high",
> +			     &video->v_sync_polarity);
> +	of_property_read_u32(dp_node, "interlaced",
> +			     &video->interlaced);
> +}
> +
>  static void analogix_dp_bridge_nop(struct drm_bridge *bridge)
>  {
>  	/* do nothing */
> @@ -1040,6 +1119,7 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
>  	.disable = analogix_dp_bridge_disable,
>  	.pre_enable = analogix_dp_bridge_nop,
>  	.post_disable = analogix_dp_bridge_nop,
> +	.mode_set = analogix_dp_bridge_mode_set,
>  	.attach = analogix_dp_bridge_attach,
>  };
>  
> @@ -1070,62 +1150,24 @@ static int analogix_dp_create_bridge(struct drm_device *drm_dev,
>  	return 0;
>  }
>  
> -static struct video_info *analogix_dp_dt_parse_pdata(struct device *dev)
> +static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
>  {
> -	struct device_node *dp_node = dev->of_node;
> -	struct video_info *dp_video_config;
> -
> -	dp_video_config = devm_kzalloc(dev, sizeof(*dp_video_config),
> -				       GFP_KERNEL);
> -	if (!dp_video_config)
> -		return ERR_PTR(-ENOMEM);
> -
> -	dp_video_config->h_sync_polarity =
> -		of_property_read_bool(dp_node, "hsync-active-high");
> -
> -	dp_video_config->v_sync_polarity =
> -		of_property_read_bool(dp_node, "vsync-active-high");
> -
> -	dp_video_config->interlaced =
> -		of_property_read_bool(dp_node, "interlaced");
> -
> -	if (of_property_read_u32(dp_node, "samsung,color-space",
> -				 &dp_video_config->color_space)) {
> -		dev_err(dev, "failed to get color-space\n");
> -		return ERR_PTR(-EINVAL);
> -	}
> -
> -	if (of_property_read_u32(dp_node, "samsung,dynamic-range",
> -				 &dp_video_config->dynamic_range)) {
> -		dev_err(dev, "failed to get dynamic-range\n");
> -		return ERR_PTR(-EINVAL);
> -	}
> -
> -	if (of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
> -				 &dp_video_config->ycbcr_coeff)) {
> -		dev_err(dev, "failed to get ycbcr-coeff\n");
> -		return ERR_PTR(-EINVAL);
> -	}
> -
> -	if (of_property_read_u32(dp_node, "samsung,color-depth",
> -				 &dp_video_config->color_depth)) {
> -		dev_err(dev, "failed to get color-depth\n");
> -		return ERR_PTR(-EINVAL);
> -	}
> +	struct device_node *dp_node = dp->dev->of_node;
> +	struct video_info *video_info = &dp->video_info
>  
>  	if (of_property_read_u32(dp_node, "samsung,link-rate",
> -				 &dp_video_config->link_rate)) {
> +				 &video_info->link_rate)) {
>  		dev_err(dev, "failed to get link-rate\n");
> -		return ERR_PTR(-EINVAL);
> +		return -EINVAL;
>  	}
>  
>  	if (of_property_read_u32(dp_node, "samsung,lane-count",
> -				 &dp_video_config->lane_count)) {
> +				 &video_info->lane_count)) {
>  		dev_err(dev, "failed to get lane-count\n");
> -		return ERR_PTR(-EINVAL);
> +		return -EINVAL;
>  	}
>  
> -	return dp_video_config;
> +	return 0;
>  }
>  
>  int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
> @@ -1158,9 +1200,9 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
>  	 */
>  	dp->plat_data = plat_data;
>  
> -	dp->video_info = analogix_dp_dt_parse_pdata(&pdev->dev);
> -	if (IS_ERR(dp->video_info))
> -		return PTR_ERR(dp->video_info);
> +	ret = analogix_dp_dt_parse_pdata(dp);
> +	if (ret)
> +		return ret;
>  
>  	dp->phy = devm_phy_get(dp->dev, "dp");
>  	if (IS_ERR(dp->phy)) {
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> index 9a90a18..730486d 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> @@ -120,9 +120,9 @@ enum dp_irq_type {
>  struct video_info {
>  	char *name;
>  
> -	bool h_sync_polarity;
> -	bool v_sync_polarity;
> -	bool interlaced;
> +	u32 h_sync_polarity;
> +	u32 v_sync_polarity;
> +	u32 interlaced;
>  
>  	enum color_space color_space;
>  	enum dynamic_range dynamic_range;
> @@ -154,7 +154,7 @@ struct analogix_dp_device {
>  	unsigned int		irq;
>  	void __iomem		*reg_base;
>  
> -	struct video_info	*video_info;
> +	struct video_info	video_info;
>  	struct link_train	link_train;
>  	struct work_struct	hotplug_work;
>  	struct phy		*phy;
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index a388c0a..861097a 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -1084,15 +1084,15 @@ void analogix_dp_set_video_color_format(struct analogix_dp_device *dp)
>  	u32 reg;
>  
>  	/* Configure the input color depth, color space, dynamic range */
> -	reg = (dp->video_info->dynamic_range << IN_D_RANGE_SHIFT) |
> -		(dp->video_info->color_depth << IN_BPC_SHIFT) |
> -		(dp->video_info->color_space << IN_COLOR_F_SHIFT);
> +	reg = (dp->video_info.dynamic_range << IN_D_RANGE_SHIFT) |
> +		(dp->video_info.color_depth << IN_BPC_SHIFT) |
> +		(dp->video_info.color_space << IN_COLOR_F_SHIFT);
>  	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_2);
>  
>  	/* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
>  	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
>  	reg &= ~IN_YC_COEFFI_MASK;
> -	if (dp->video_info->ycbcr_coeff)
> +	if (dp->video_info.ycbcr_coeff)
>  		reg |= IN_YC_COEFFI_ITU709;
>  	else
>  		reg |= IN_YC_COEFFI_ITU601;
> @@ -1229,17 +1229,17 @@ void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp)
>  
>  	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
>  	reg &= ~INTERACE_SCAN_CFG;
> -	reg |= (dp->video_info->interlaced << 2);
> +	reg |= (dp->video_info.interlaced << 2);
>  	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
>  
>  	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
>  	reg &= ~VSYNC_POLARITY_CFG;
> -	reg |= (dp->video_info->v_sync_polarity << 1);
> +	reg |= (dp->video_info.v_sync_polarity << 1);
>  	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
>  
>  	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
>  	reg &= ~HSYNC_POLARITY_CFG;
> -	reg |= (dp->video_info->h_sync_polarity << 0);
> +	reg |= (dp->video_info.h_sync_polarity << 0);
>  	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
>  
>  	reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
> 




More information about the linux-arm-kernel mailing list