[PATCH v6 0/5] Add DT support for netxbig LEDs

[Simon Guinot]

Hello,

This patch series adds DT support for the LEDs found on the
Kirkwood-based LaCie boards 2Big and 5Big Network v2.

Changes for v2:
- Check timer mode value retrieved from DT.
- In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
  timer delay values from DT with function of_property_read_u32_index.
  Instead, use a temporary u32 variable. This allows to silence a static
  checker warning.
- Make timer property optional in the binding documentation. It is now
  aligned with the driver code.

Changes for v3:
- Fix pointer usage with the temporary u32 variable while calling
  of_property_read_u32_index.

Changes for v4:
- In DT binding document netxbig-gpio-ext.txt, detail byte order for
  registers and latch mechanism for "enable-gpio".
- In leds-netxbig.c, add some error messages.
- In leds-netxbig.c, fix some "sizeof" style issues.
- In leds-netxbig.c, in netxbig_leds_get_of_pdata(), move the
  of_property_read_string() calls after the error-prone checks.
- Add some Acked-by.

Changes for v5:
- Rename DT property "bright-max" into the more common "max-brightness".
- Make use of the "max-brightness" DT property. Instead of counting the
  data pins of the GPIO extension bus, use "max-brightness" to get the
  maximum brightness level.
- Add a patch to convert the leds-netxbig driver to the devm_ functions.

Changes for v6:
- Add a patch to set led_classdev max_brightness in the leds-netxbig
  driver.
- Decrement the current child node refcount with of_node_put() when an
  error happens while iterating with for_each_child_of_node().

Thanks,

Simon

Simon Guinot (5):
  leds: netxbig: add device tree binding
  ARM: Kirkwood: add LED DT entries for netxbig boards
  ARM: mvebu: remove static LED setup for netxbig boards
  leds: netxbig: convert to use the devm_ functions
  leds: netxbig: set led_classdev max_brightness

 .../devicetree/bindings/gpio/netxbig-gpio-ext.txt  |  22 ++
 .../devicetree/bindings/leds/leds-netxbig.txt      |  92 ++++++
 arch/arm/boot/dts/kirkwood-net5big.dts             |  60 ++++
 arch/arm/boot/dts/kirkwood-netxbig.dtsi            |  80 +++++
 arch/arm/mach-mvebu/Kconfig                        |   7 -
 arch/arm/mach-mvebu/Makefile                       |   1 -
 arch/arm/mach-mvebu/board.h                        |  21 --
 arch/arm/mach-mvebu/kirkwood.c                     |   4 -
 arch/arm/mach-mvebu/netxbig.c                      | 191 ------------
 drivers/leds/leds-netxbig.c                        | 336 ++++++++++++++++-----
 include/dt-bindings/leds/leds-netxbig.h            |  18 ++
 .../linux/platform_data/leds-kirkwood-netxbig.h    |   1 +
 12 files changed, 531 insertions(+), 302 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
 create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
 delete mode 100644 arch/arm/mach-mvebu/board.h
 delete mode 100644 arch/arm/mach-mvebu/netxbig.c
 create mode 100644 include/dt-bindings/leds/leds-netxbig.h

-- 
2.1.4