[PATCH v3 1/5] powerpc/fsl: Move fsl_guts.h out of arch/powerpc

Scott Wood scottwood at freescale.com
Sat Sep 19 21:29:53 PDT 2015


Freescale's Layerscape ARM chips use the same structure.

Signed-off-by: Scott Wood <scottwood at freescale.com>
---
v3: was patch 2/5

 arch/powerpc/include/asm/fsl_guts.h        | 192 -----------------------------
 arch/powerpc/platforms/85xx/mpc85xx_mds.c  |   2 +-
 arch/powerpc/platforms/85xx/mpc85xx_rdb.c  |   2 +-
 arch/powerpc/platforms/85xx/p1022_ds.c     |   2 +-
 arch/powerpc/platforms/85xx/p1022_rdk.c    |   2 +-
 arch/powerpc/platforms/85xx/smp.c          |   2 +-
 arch/powerpc/platforms/85xx/twr_p102x.c    |   2 +-
 arch/powerpc/platforms/86xx/mpc8610_hpcd.c |   2 +-
 drivers/iommu/fsl_pamu.c                   |   2 +-
 include/linux/fsl/guts.h                   | 192 +++++++++++++++++++++++++++++
 sound/soc/fsl/mpc8610_hpcd.c               |   2 +-
 sound/soc/fsl/p1022_ds.c                   |   2 +-
 sound/soc/fsl/p1022_rdk.c                  |   2 +-
 13 files changed, 203 insertions(+), 203 deletions(-)
 delete mode 100644 arch/powerpc/include/asm/fsl_guts.h
 create mode 100644 include/linux/fsl/guts.h

diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h
deleted file mode 100644
index 43b6bb1..0000000
--- a/arch/powerpc/include/asm/fsl_guts.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/**
- * Freecale 85xx and 86xx Global Utilties register set
- *
- * Authors: Jeff Brown
- *          Timur Tabi <timur at freescale.com>
- *
- * Copyright 2004,2007,2012 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_POWERPC_FSL_GUTS_H__
-#define __ASM_POWERPC_FSL_GUTS_H__
-#ifdef __KERNEL__
-
-/**
- * Global Utility Registers.
- *
- * Not all registers defined in this structure are available on all chips, so
- * you are expected to know whether a given register actually exists on your
- * chip before you access it.
- *
- * Also, some registers are similar on different chips but have slightly
- * different names.  In these cases, one name is chosen to avoid extraneous
- * #ifdefs.
- */
-struct ccsr_guts {
-	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
-	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
-	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
-	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
-	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
-	__be32	pordevsr2;	/* 0x.0014 - POR device status register 2 */
-	u8	res018[0x20 - 0x18];
-	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
-	u8	res024[0x30 - 0x24];
-	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
-	u8	res034[0x40 - 0x34];
-	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
-	u8	res044[0x50 - 0x44];
-	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
-	u8	res054[0x60 - 0x54];
-	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
-        __be32  pmuxcr2;	/* 0x.0064 - Alternate function signal multiplex control 2 */
-        __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
-        u8	res06c[0x70 - 0x6c];
-	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
-#define CCSR_GUTS_DEVDISR_TB1	0x00001000
-#define CCSR_GUTS_DEVDISR_TB0	0x00004000
-	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
-	u8	res078[0x7c - 0x78];
-	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
-	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
-	__be32  pmrccr;		/* 0x.0084 - Power Management Reset Counter Configuration Register */
-	__be32  pmpdccr;	/* 0x.0088 - Power Management Power Down Counter Configuration Register */
-	__be32  pmcdr;		/* 0x.008c - 4Power management clock disable register */
-	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
-	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
-	__be32  ectrstcr;	/* 0x.0098 - Exception reset control register */
-	__be32  autorstsr;	/* 0x.009c - Automatic reset status register */
-	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
-	__be32	svr;		/* 0x.00a4 - System Version Register */
-	u8	res0a8[0xb0 - 0xa8];
-	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
-	u8	res0b4[0xc0 - 0xb4];
-	__be32  iovselsr;	/* 0x.00c0 - I/O voltage select status register
-					     Called 'elbcvselcr' on 86xx SOCs */
-	u8	res0c4[0x100 - 0xc4];
-	__be32	rcwsr[16];	/* 0x.0100 - Reset Control Word Status registers
-					     There are 16 registers */
-	u8	res140[0x224 - 0x140];
-	__be32  iodelay1;	/* 0x.0224 - IO delay control register 1 */
-	__be32  iodelay2;	/* 0x.0228 - IO delay control register 2 */
-	u8	res22c[0x604 - 0x22c];
-	__be32	pamubypenr; 	/* 0x.604 - PAMU bypass enable register */
-	u8	res608[0x800 - 0x608];
-	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
-	u8	res804[0x900 - 0x804];
-	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
-	u8	res904[0x908 - 0x904];
-	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
-	u8	res90c[0x914 - 0x90c];
-	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
-	u8	res918[0xb20 - 0x918];
-	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
-	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
-	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
-	u8	resb2c[0xe00 - 0xb2c];
-	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
-	u8	rese04[0xe10 - 0xe04];
-	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
-	u8	rese14[0xe20 - 0xe14];
-	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
-	__be32  cpfor;		/* 0x.0e24 - L2 charge pump fuse override register */
-	u8	rese28[0xf04 - 0xe28];
-	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
-	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
-	u8	resf0c[0xf2c - 0xf0c];
-	__be32  itcr;		/* 0x.0f2c - Internal transaction control register */
-	u8	resf30[0xf40 - 0xf30];
-	__be32	srds2cr0;	/* 0x.0f40 - SerDes2 Control Register 0 */
-	__be32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
-} __attribute__ ((packed));
-
-
-/* Alternate function signal multiplex control */
-#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
-
-#ifdef CONFIG_PPC_86xx
-
-#define CCSR_GUTS_DMACR_DEV_SSI	0	/* DMA controller/channel set to SSI */
-#define CCSR_GUTS_DMACR_DEV_IR	1	/* DMA controller/channel set to IR */
-
-/*
- * Set the DMACR register in the GUTS
- *
- * The DMACR register determines the source of initiated transfers for each
- * channel on each DMA controller.  Rather than have a bunch of repetitive
- * macros for the bit patterns, we just have a function that calculates
- * them.
- *
- * guts: Pointer to GUTS structure
- * co: The DMA controller (0 or 1)
- * ch: The channel on the DMA controller (0, 1, 2, or 3)
- * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
- */
-static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
-	unsigned int co, unsigned int ch, unsigned int device)
-{
-	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
-
-	clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
-}
-
-#define CCSR_GUTS_PMUXCR_LDPSEL		0x00010000
-#define CCSR_GUTS_PMUXCR_SSI1_MASK	0x0000C000	/* Bitmask for SSI1 */
-#define CCSR_GUTS_PMUXCR_SSI1_LA	0x00000000	/* Latched address */
-#define CCSR_GUTS_PMUXCR_SSI1_HI	0x00004000	/* High impedance */
-#define CCSR_GUTS_PMUXCR_SSI1_SSI	0x00008000	/* Used for SSI1 */
-#define CCSR_GUTS_PMUXCR_SSI2_MASK	0x00003000	/* Bitmask for SSI2 */
-#define CCSR_GUTS_PMUXCR_SSI2_LA	0x00000000	/* Latched address */
-#define CCSR_GUTS_PMUXCR_SSI2_HI	0x00001000	/* High impedance */
-#define CCSR_GUTS_PMUXCR_SSI2_SSI	0x00002000	/* Used for SSI2 */
-#define CCSR_GUTS_PMUXCR_LA_22_25_LA	0x00000000	/* Latched Address */
-#define CCSR_GUTS_PMUXCR_LA_22_25_HI	0x00000400	/* High impedance */
-#define CCSR_GUTS_PMUXCR_DBGDRV		0x00000200	/* Signals not driven */
-#define CCSR_GUTS_PMUXCR_DMA2_0		0x00000008
-#define CCSR_GUTS_PMUXCR_DMA2_3		0x00000004
-#define CCSR_GUTS_PMUXCR_DMA1_0		0x00000002
-#define CCSR_GUTS_PMUXCR_DMA1_3		0x00000001
-
-/*
- * Set the DMA external control bits in the GUTS
- *
- * The DMA external control bits in the PMUXCR are only meaningful for
- * channels 0 and 3.  Any other channels are ignored.
- *
- * guts: Pointer to GUTS structure
- * co: The DMA controller (0 or 1)
- * ch: The channel on the DMA controller (0, 1, 2, or 3)
- * value: the new value for the bit (0 or 1)
- */
-static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
-	unsigned int co, unsigned int ch, unsigned int value)
-{
-	if ((ch == 0) || (ch == 3)) {
-		unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
-
-		clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
-	}
-}
-
-#define CCSR_GUTS_CLKDVDR_PXCKEN	0x80000000
-#define CCSR_GUTS_CLKDVDR_SSICKEN	0x20000000
-#define CCSR_GUTS_CLKDVDR_PXCKINV	0x10000000
-#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
-#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK	0x06000000
-#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
-	(((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
-#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT	16
-#define CCSR_GUTS_CLKDVDR_PXCLK_MASK	0x001F0000
-#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
-#define CCSR_GUTS_CLKDVDR_SSICLK_MASK	0x000000FF
-#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
-
-#endif
-
-#endif
-#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a392e94..f0be439 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -34,6 +34,7 @@
 #include <linux/of_device.h>
 #include <linux/phy.h>
 #include <linux/memblock.h>
+#include <linux/fsl/guts.h>
 
 #include <linux/atomic.h>
 #include <asm/time.h>
@@ -51,7 +52,6 @@
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
-#include <asm/fsl_guts.h>
 #include "smp.h"
 
 #include "mpc85xx.h"
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index e358bed..50dcc00 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -17,6 +17,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -27,7 +28,6 @@
 #include <asm/mpic.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
-#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 6ac986d3..371df82 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -16,6 +16,7 @@
  * kind, whether express or implied.
  */
 
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <asm/div64.h>
@@ -25,7 +26,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/udbg.h>
-#include <asm/fsl_guts.h>
 #include <asm/fsl_lbc.h>
 #include "smp.h"
 
diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c
index 680232d..5087bec 100644
--- a/arch/powerpc/platforms/85xx/p1022_rdk.c
+++ b/arch/powerpc/platforms/85xx/p1022_rdk.c
@@ -12,6 +12,7 @@
  * kind, whether express or implied.
  */
 
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <asm/div64.h>
@@ -21,7 +22,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/udbg.h>
-#include <asm/fsl_guts.h>
 #include "smp.h"
 
 #include "mpc85xx.h"
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index b8b8216..6ac7786 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -19,6 +19,7 @@
 #include <linux/kexec.h>
 #include <linux/highmem.h>
 #include <linux/cpu.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -26,7 +27,6 @@
 #include <asm/mpic.h>
 #include <asm/cacheflush.h>
 #include <asm/dbell.h>
-#include <asm/fsl_guts.h>
 #include <asm/code-patching.h>
 #include <asm/cputhreads.h>
 
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
index 30e002f..892e613 100644
--- a/arch/powerpc/platforms/85xx/twr_p102x.c
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 
@@ -23,7 +24,6 @@
 #include <asm/mpic.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
-#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 55413a5..437a9c3 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -38,7 +39,6 @@
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/simple_gpio.h>
-#include <asm/fsl_guts.h>
 
 #include "mpc86xx.h"
 
diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index 2570f2a2..a34355f 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -20,11 +20,11 @@
 
 #include "fsl_pamu.h"
 
+#include <linux/fsl/guts.h>
 #include <linux/interrupt.h>
 #include <linux/genalloc.h>
 
 #include <asm/mpc85xx.h>
-#include <asm/fsl_guts.h>
 
 /* define indexes for each operation mapping scenario */
 #define OMI_QMAN        0x00
diff --git a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h
new file mode 100644
index 0000000..84d971f
--- /dev/null
+++ b/include/linux/fsl/guts.h
@@ -0,0 +1,192 @@
+/**
+ * Freecale 85xx and 86xx Global Utilties register set
+ *
+ * Authors: Jeff Brown
+ *          Timur Tabi <timur at freescale.com>
+ *
+ * Copyright 2004,2007,2012 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FSL_GUTS_H__
+#define __FSL_GUTS_H__
+
+#include <linux/types.h>
+
+/**
+ * Global Utility Registers.
+ *
+ * Not all registers defined in this structure are available on all chips, so
+ * you are expected to know whether a given register actually exists on your
+ * chip before you access it.
+ *
+ * Also, some registers are similar on different chips but have slightly
+ * different names.  In these cases, one name is chosen to avoid extraneous
+ * #ifdefs.
+ */
+struct ccsr_guts {
+	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
+	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
+	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
+	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
+	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
+	__be32	pordevsr2;	/* 0x.0014 - POR device status register 2 */
+	u8	res018[0x20 - 0x18];
+	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
+	u8	res024[0x30 - 0x24];
+	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
+	u8	res034[0x40 - 0x34];
+	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
+	u8	res044[0x50 - 0x44];
+	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
+	u8	res054[0x60 - 0x54];
+	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
+        __be32  pmuxcr2;	/* 0x.0064 - Alternate function signal multiplex control 2 */
+        __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
+        u8	res06c[0x70 - 0x6c];
+	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
+#define CCSR_GUTS_DEVDISR_TB1	0x00001000
+#define CCSR_GUTS_DEVDISR_TB0	0x00004000
+	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
+	u8	res078[0x7c - 0x78];
+	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
+	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
+	__be32  pmrccr;		/* 0x.0084 - Power Management Reset Counter Configuration Register */
+	__be32  pmpdccr;	/* 0x.0088 - Power Management Power Down Counter Configuration Register */
+	__be32  pmcdr;		/* 0x.008c - 4Power management clock disable register */
+	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
+	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
+	__be32  ectrstcr;	/* 0x.0098 - Exception reset control register */
+	__be32  autorstsr;	/* 0x.009c - Automatic reset status register */
+	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
+	__be32	svr;		/* 0x.00a4 - System Version Register */
+	u8	res0a8[0xb0 - 0xa8];
+	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
+	u8	res0b4[0xc0 - 0xb4];
+	__be32  iovselsr;	/* 0x.00c0 - I/O voltage select status register
+					     Called 'elbcvselcr' on 86xx SOCs */
+	u8	res0c4[0x100 - 0xc4];
+	__be32	rcwsr[16];	/* 0x.0100 - Reset Control Word Status registers
+					     There are 16 registers */
+	u8	res140[0x224 - 0x140];
+	__be32  iodelay1;	/* 0x.0224 - IO delay control register 1 */
+	__be32  iodelay2;	/* 0x.0228 - IO delay control register 2 */
+	u8	res22c[0x604 - 0x22c];
+	__be32	pamubypenr; 	/* 0x.604 - PAMU bypass enable register */
+	u8	res608[0x800 - 0x608];
+	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
+	u8	res804[0x900 - 0x804];
+	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
+	u8	res904[0x908 - 0x904];
+	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
+	u8	res90c[0x914 - 0x90c];
+	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
+	u8	res918[0xb20 - 0x918];
+	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
+	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
+	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
+	u8	resb2c[0xe00 - 0xb2c];
+	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
+	u8	rese04[0xe10 - 0xe04];
+	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
+	u8	rese14[0xe20 - 0xe14];
+	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
+	__be32  cpfor;		/* 0x.0e24 - L2 charge pump fuse override register */
+	u8	rese28[0xf04 - 0xe28];
+	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
+	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
+	u8	resf0c[0xf2c - 0xf0c];
+	__be32  itcr;		/* 0x.0f2c - Internal transaction control register */
+	u8	resf30[0xf40 - 0xf30];
+	__be32	srds2cr0;	/* 0x.0f40 - SerDes2 Control Register 0 */
+	__be32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
+} __attribute__ ((packed));
+
+
+/* Alternate function signal multiplex control */
+#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
+
+#ifdef CONFIG_PPC_86xx
+
+#define CCSR_GUTS_DMACR_DEV_SSI	0	/* DMA controller/channel set to SSI */
+#define CCSR_GUTS_DMACR_DEV_IR	1	/* DMA controller/channel set to IR */
+
+/*
+ * Set the DMACR register in the GUTS
+ *
+ * The DMACR register determines the source of initiated transfers for each
+ * channel on each DMA controller.  Rather than have a bunch of repetitive
+ * macros for the bit patterns, we just have a function that calculates
+ * them.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (0 or 1)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
+ */
+static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
+	unsigned int co, unsigned int ch, unsigned int device)
+{
+	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
+
+	clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
+}
+
+#define CCSR_GUTS_PMUXCR_LDPSEL		0x00010000
+#define CCSR_GUTS_PMUXCR_SSI1_MASK	0x0000C000	/* Bitmask for SSI1 */
+#define CCSR_GUTS_PMUXCR_SSI1_LA	0x00000000	/* Latched address */
+#define CCSR_GUTS_PMUXCR_SSI1_HI	0x00004000	/* High impedance */
+#define CCSR_GUTS_PMUXCR_SSI1_SSI	0x00008000	/* Used for SSI1 */
+#define CCSR_GUTS_PMUXCR_SSI2_MASK	0x00003000	/* Bitmask for SSI2 */
+#define CCSR_GUTS_PMUXCR_SSI2_LA	0x00000000	/* Latched address */
+#define CCSR_GUTS_PMUXCR_SSI2_HI	0x00001000	/* High impedance */
+#define CCSR_GUTS_PMUXCR_SSI2_SSI	0x00002000	/* Used for SSI2 */
+#define CCSR_GUTS_PMUXCR_LA_22_25_LA	0x00000000	/* Latched Address */
+#define CCSR_GUTS_PMUXCR_LA_22_25_HI	0x00000400	/* High impedance */
+#define CCSR_GUTS_PMUXCR_DBGDRV		0x00000200	/* Signals not driven */
+#define CCSR_GUTS_PMUXCR_DMA2_0		0x00000008
+#define CCSR_GUTS_PMUXCR_DMA2_3		0x00000004
+#define CCSR_GUTS_PMUXCR_DMA1_0		0x00000002
+#define CCSR_GUTS_PMUXCR_DMA1_3		0x00000001
+
+/*
+ * Set the DMA external control bits in the GUTS
+ *
+ * The DMA external control bits in the PMUXCR are only meaningful for
+ * channels 0 and 3.  Any other channels are ignored.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (0 or 1)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * value: the new value for the bit (0 or 1)
+ */
+static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
+	unsigned int co, unsigned int ch, unsigned int value)
+{
+	if ((ch == 0) || (ch == 3)) {
+		unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
+
+		clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
+	}
+}
+
+#define CCSR_GUTS_CLKDVDR_PXCKEN	0x80000000
+#define CCSR_GUTS_CLKDVDR_SSICKEN	0x20000000
+#define CCSR_GUTS_CLKDVDR_PXCKINV	0x10000000
+#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
+#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK	0x06000000
+#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
+	(((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
+#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT	16
+#define CCSR_GUTS_CLKDVDR_PXCLK_MASK	0x001F0000
+#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
+#define CCSR_GUTS_CLKDVDR_SSICLK_MASK	0x000000FF
+#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
+
+#endif
+
+#endif
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 9621b91..6f236f1 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -12,11 +12,11 @@
 
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/fsl/guts.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <sound/soc.h>
-#include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index 71c1a7d..747aab0 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -11,12 +11,12 @@
  */
 
 #include <linux/module.h>
+#include <linux/fsl/guts.h>
 #include <linux/interrupt.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <sound/soc.h>
-#include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"
diff --git a/sound/soc/fsl/p1022_rdk.c b/sound/soc/fsl/p1022_rdk.c
index ee29048..1dd49e5 100644
--- a/sound/soc/fsl/p1022_rdk.c
+++ b/sound/soc/fsl/p1022_rdk.c
@@ -18,12 +18,12 @@
  */
 
 #include <linux/module.h>
+#include <linux/fsl/guts.h>
 #include <linux/interrupt.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <sound/soc.h>
-#include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"
-- 
2.1.4




More information about the linux-arm-kernel mailing list