[PATCH v2 7/9] arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes

Rajendra Nayak rnayak at codeaurora.org
Tue Sep 15 23:23:21 PDT 2015


TSENS is part of GCC, hence add TSENS properties as part of GCC node.
Also add thermal zones and qfprom nodes.

Signed-off-by: Rajendra Nayak <rnayak at codeaurora.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 101 ++++++++++++++++++++++++++++++++++++
 1 file changed, 101 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index d2e94d6..6a0866b 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -75,6 +75,88 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 7>;
+
+			trips {
+				cpu_alert0: trip at 0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip at 1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 8>;
+
+			trips {
+				cpu_alert1: trip at 0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip at 1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 9>;
+
+			trips {
+				cpu_alert2: trip at 0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip at 1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 10>;
+
+			trips {
+				cpu_alert3: trip at 0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip at 1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 10 0x304>;
@@ -364,11 +446,30 @@
 			};
 		};
 
+		qfprom: qfprom at 00700000 {
+			compatible	= "qcom,qfprom";
+			reg		= <0x00700000 0x1000>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+			tsens_calib: calib {
+				reg = <0x404 0x10>;
+			};
+			tsens_backup: backup_calib {
+				reg = <0x414 0x10>;
+			};
+		};
+
 		gcc: clock-controller at 900000 {
 			compatible = "qcom,gcc-apq8064";
 			reg = <0x00900000 0x4000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			qcom,tsens-slopes = <1176 1176 1154 1176 1111
+				1132 1132 1199 1132 1199 1132>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#thermal-sensor-cells = <1>;
 		};
 
 		lcc: clock-controller at 28000000 {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation




More information about the linux-arm-kernel mailing list