Cortex A9 MP: ARM errata 754323 implementation?

[Dirk Behme]

On 03.09.2015 19:29, Catalin Marinas wrote:
> On Thu, Sep 03, 2015 at 10:26:49AM +0200, Dirk Behme wrote:
>> On 03.09.2015 10:05, Russell King - ARM Linux wrote:
>>> On Thu, Sep 03, 2015 at 09:40:21AM +0200, Dirk Behme wrote:
>>>> looking through the ARM Cortex A9 errata list [1] I wonder why we don't have
>>>> a workaround for
>>>>
>>>> (754323) Repeated Store in the same cache line might delay the visibility of
>>>> the Store
>>>>
>>>> in the kernel? Or have I missed it?
>>>
>>> The policy for errata is not to implement them unless there's a requirement
>>> to do so - and then the errata should be implemented in board firmware in
>>> preference to the kernel where possible.
>>>
>>> Are you seeing a problem directly attributable to this errata?
>>
>> I got a report from some internal testing that an issue they see goes away
>> if they enable 754327. I rejected this because i.MX6 is > r2p0 and therefore
>> can't be affected by this errata. Looking through the list of erratas I then
>> found the related 754323 which seems to apply to i.MX6, but is not
>> implemented.
>
> These errata are usually harmless, in most cases it prevents the system
> from making progress (like flag update not visible while being polled by
> another CPU), hence the workaround makes cpu_relax() a barrier since
> most polling loops should use it.
>
>> The issue we are talking about is
>>
>> Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
>> PC is at kfree+0x10c/0x238
>> LR is at release_firmware+0x5c/0x70
>>
>> which is said to be triggered by this code
>>
>> void kfree(const void *x)
>> ...
>> page = virt_to_head_page(x);
>> if (unlikely(!PageSlab(page))) {
>> BUG_ON(!PageCompound(page));
>> ...
>>
>> on a custom 3.14.x kernel. I haven't looked into this myself, but at least
>> two people think that the kmalloc/kfree is correct with the
>> request_firmware()/release_firmware() usage in the driver.
>
> I don't see how the erratum above would trigger a BUG. It's possible
> that there are some memory ordering issues (and A9 has some read after
> read bugs) that are hidden when enabling the barrier in cpu_relax().


Do you have anything specific in mind we could try? Besides enabling 
754327?


Best regards

Dirk