[PATCH 4/4] Documentation: dt-bindings: Describe SROMc configuration

[Pankaj Dubey]

Hi Pavel,

On Monday 26 October 2015 05:17 PM, Pavel Fedin wrote:
> Add documentation for new properties, allowing bank configuration.
>
> Signed-off-by: Pavel Fedin <p.fedin at samsung.com>
> ---
>   .../devicetree/bindings/arm/samsung/exynos-srom.txt   | 19 ++++++++++++++++++-
>   1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt
> index 33886d5..73750da 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-srom.txt
> @@ -5,8 +5,25 @@ Required properties:
>
>   - reg: offset and length of the register set
>
> -Example:
> +Bank configurations can be defined as an optional subnodes. They can have the
> +following properties:
> +- bank : bank number (0 - 3)
> +- width : data width in bytes (1 or 2). If omitted, default of 1 is used.
> +- srom-timing : array of 7 integers: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs
> +

I think these will be optional properties as all Exynos SoC may not be 
having these. So better to add them under "Optional Properties" heading, 
and move this above the "-Example" heading

> +Example: basic definition, no banks are configured
> +	sromc at 12570000 {
> +		compatible = "samsung,exynos-srom";
> +		reg = <0x12570000 0x10>;
> +	};
> +
> +Example: SROMc with bank3 configuration
>   	sromc at 12570000 {
>   		compatible = "samsung,exynos-srom";
>   		reg = <0x12570000 0x10>;
> +		bank at 3 {
> +			bank = <3>;
> +			width = <2>;
> +			srom-timing = <1 9 12 1 9 1 1>;
> +		};
>   	};
>

Thanks,
Pankaj Dubey