[PATCH V6 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC

[Li Yang]

On Fri, Oct 23, 2015 at 3:01 AM, Zhiqiang Hou <B48286 at freescale.com> wrote:
> From: Mingkai Hu <Mingkai.Hu at freescale.com>
>
> LS1043a is an SoC with 4 ARMv8 A53 cores and most other IP blocks
> similar to LS1021a which complies to Chassis 2.1 spec.
>
> Following levels of DTSI/DTS files have been created for the
> LS1043A SoC family:
>
> - fsl-ls1043a.dtsi:
>   DTS-Include file for FSL LS1043A SoC.
>
> Signed-off-by: Li Yang <leoli at freescale.com>
> Signed-off-by: Hou Zhiqiang <B48286 at freescale.com>
> Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
> Signed-off-by: Wenbin Song <Wenbin.Song at freescale.com>

Hi Arnd,

Can you also review and merge the LS1043 device tree related patches
in the series(3/6,4/6,6/6)?

Regards,
Leo

> ---
> V6:
>  - No change.
>
> V5:
>  - Move gic, timer and pmu nodes out of SoC node.
>
> V4:
>  - Add soc node with simple-bus compatible.
>  - Add property interrupt-affinity for armv8 pmuv3 node.
>
> V3:
>  - Add device tree node for SATA.
>  - Remove properity enable-method for all cpu node.
>    Remove reserved memory region for spin-table.
>
> V2:
>  - Add secondary core boot method.
>  - Move out the sysclk node from the clockgen node.
>  - Correct the reg size of GICC.
>
>  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 525 +++++++++++++++++++++++++
>  1 file changed, 525 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi