[RESEND PATCH v2 2/2] ARM: dts: rockchip: Add the OTP gpio pinctrl

Caesar Wang wxt at rock-chips.com
Wed Oct 21 19:30:48 PDT 2015


Add the "init" pinctrl as the OTP gpio state.
We need the OTP pin is gpio state before resetting the TSADC controller,
since the tshut polarity will generate a high signal.

"init" pinctrl property is defined by Doug's Patch[0].

Patch[0]:
https://patchwork.kernel.org/patch/7454311/

Signed-off-by: Caesar Wang <wxt at rock-chips.com>
Reviewed-by: Douglas Anderson <dianders at chromium.org>
---

Changes in v2:
  - Add some commits for more obvious in PATCH[2/2]

Changes in v1:
  - As the Doug comments, drop the thermal driver patchs since
    we can with pinctrl changing to work.
  - As the Doug's patch to add the 'init' property.

 arch/arm/boot/dts/rk3288.dtsi | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 906e938..6ea89aa 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -447,8 +447,9 @@
 		clock-names = "tsadc", "apb_pclk";
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
-		pinctrl-names = "default";
-		pinctrl-0 = <&otp_out>;
+		pinctrl-names = "init", "default";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
 		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
@@ -1273,6 +1274,10 @@
 		};
 
 		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
 			otp_out: otp-out {
 				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
 			};
-- 
1.9.1




More information about the linux-arm-kernel mailing list