[PATCHv2 0/3] Adding FPGA Manager support for Xilinx Zynq

[Josh Cartwright]

On Fri, Oct 16, 2015 at 03:42:27PM -0700, Moritz Fischer wrote:
> Hi all,
> 
> I've tried to address most of the feedback that was brought up,
> the one thing I haven't looked at was the firmware format part,
> since that was still in discussion.
> So I'm still open to suggestions on how to handle this.

Was there disagreement?  I had thought we settled on limiting the
handling the BIN format explicitly, the rest of the thread was about
userspace tooling for BIT->BIN conversion.

  Josh