[PATCH V3 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC

Hou Zhiqiang B48286 at freescale.com
Thu Oct 15 00:34:12 PDT 2015



> -----Original Message-----
> From: Wood Scott-B07421
> Sent: 2015年10月15日 11:57
> To: Hou Zhiqiang-B48286
> Cc: linux-arm-kernel at lists.infradead.org; catalin.marinas at arm.com;
> will.deacon at arm.com; linux-i2c at vger.kernel.org; linux-
> watchdog at vger.kernel.org; linux-doc at vger.kernel.org; linux-
> clk at vger.kernel.org; mark.rutland at arm.com; Hu Mingkai-B21284; Xie
> Shaohui-B21989; Sharma Bhupesh-B45370; Li Yang-Leo-R58472; wsa at the-
> dreams.de; wim at iguana.be; corbet at lwn.net; mturquette at baylibre.com;
> sboyd at codeaurora.org; Song Wenbin-B53747
> Subject: Re: [PATCH V3 4/6] arm64/ls1043a: add DTS for Freescale LS1043A
> SoC
> 
> On Wed, 2015-10-14 at 19:34 +0800, Zhiqiang Hou wrote:
> > From: Mingkai Hu <Mingkai.Hu at freescale.com>
> >
> > LS1043a is an SoC with 4 ARMv8 A53 cores and most other IP blocks
> > similar to LS1021a which complies to Chassis 2.1 spec.
> >
> > Following levels of DTSI/DTS files have been created for the LS1043A
> > SoC family:
> >
> > - fsl-ls1043a.dtsi:
> >   DTS-Include file for FSL LS1043A SoC.
> >
> > Signed-off-by: Li Yang <leoli at freescale.com>
> > Signed-off-by: Hou Zhiqiang <B48286 at freescale.com>
> > Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
> > Signed-off-by: Wenbin Song <Wenbin.Song at freescale.com>
> > ---
> > V3:
> >  - Add device tree node for SATA.
> >  - Remove properity enable-method for all cpu node.
> >    Remove reserved memory region for spin-table.
> >
> > V2:
> >  - Add secondary core boot method.
> >  - Move out the sysclk node from the clockgen node.
> >  - Correct the reg size of GICC.
> >
> >  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 513
> > +++++++++++++++++++++++++
> >  1 file changed, 513 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> 
> On the ls208x device tree we were asked to put devices under a bus node,
> such as an soc node with a simple-bus compatible.
> 

Thanks, will reform.

Thanks,
Zhiqiang


More information about the linux-arm-kernel mailing list