[PATCH v2 1/4] ARM: dts: dra7: Add dt node for the sycon pcie

[Tony Lindgren]

* Kishon Vijay Abraham I <kishon at ti.com> [151012 14:50]:
> Hi Tony,
> 
> On Tuesday 13 October 2015 02:51 AM, Tony Lindgren wrote:
> > * Kishon Vijay Abraham I <kishon at ti.com> [150915 06:37]:
> >> Add new device tree node for the control module register space where
> >> PCIe registers are present.
> >>
> >> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> >> ---
> >>  arch/arm/boot/dts/dra7.dtsi |    5 +++++
> >>  1 file changed, 5 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> >> index 5d65db9..0769b5d 100644
> >> --- a/arch/arm/boot/dts/dra7.dtsi
> >> +++ b/arch/arm/boot/dts/dra7.dtsi
> >> @@ -154,6 +154,11 @@
> >>  					compatible = "syscon";
> >>  					reg = <0x1c04 0x0020>;
> >>  				};
> >> +
> >> +				scm_conf_pcie: tisyscon at 1c24 {
> >> +					compatible = "syscon";
> >> +					reg = <0x1c24 0x0024>;
> >> +				};
> >>  			};
> >>  
> >>  			cm_core_aon: cm_core_aon at 5000 {
> > 
> > 
> > Why don't you just extend the existing scm_conf1 area? This is not all pcie
> > specific for scm_conf_pcie, at least for PLLEN_CONTROL, RMII_CLK_SETTING
> > and MUXSEL_32K_CLKIN.
> 
> scm_conf_pcie has only PCIe registers (it starts at 0x4A003C24).
> PLLEN_CONTROL and others are at 0x4A003C14 as per
> DRA75x_DRA74x_SR1.1_NDA_TRM_vW.

Oh sorry I guess I was looking at a wrong address then.

> Since PCIe itself has a bunch of registers for itself, thought of
> creating a separate dt node. But I can extend scm_conf1 area.

Why not just ioremap them then? Do these need to be shared with
some other driver?

Regards,

Tony