[PATCH v2 2/5] mmc: sdhci-pxav3: enable usage of DAT3 pin as HW card detect
mw at semihalf.com
Fri Oct 9 07:45:25 PDT 2015
>> When using DAT3-based detection Armada 38x SDIO IP expects its internal
>> clock to be always on, which had to be ensured twofold:
> What happen if runtime suspend disables its core clk and axi clk? I guess
> dat3-based detection isn't compatible with runtime pm. If so, do we also
> need to disable runtime pm in probe function?
Is runtime resume supposed to be triggered by card detection? Is there
a way to manually trigger runtime suspend and resume of sdhci? Anyway
coreclk is not a problem, as it's not used by A38x.
>> - Each time controller is reset by updating appropriate registers. On the
>> occasion of adding new register @0x104, register @0x100 name is modified
>> in order to the be aligned with Armada 38x documentation.
>> - Leaving the clock enabled despite power-down. For this purpose a new
>> quirk had to be added to SDHCI subsystem - SDHCI_QUIRK2_KEEP_INT_CLK_ON.
> As seen from other mails, Ulf calls for no more quirks...
Ok, I'll try to find another solution.
More information about the linux-arm-kernel