[PATCH v2 0/4] arm64: dts: qcom: add support to LS and HS connectors

Srinivas Kandagatla srinivas.kandagatla at linaro.org
Fri Oct 9 01:53:45 PDT 2015

Hi Andy, 

This patchset adds support for i2c and spi on High-Speed and Low speed
connectors on DB410c.
One of the patch fixes the sleep state of existing i2c node.


Changes since v1:
	- removed useless comment spotted by Stephen Boyd.
	- Use absolute names instead of lables for consistency suggested by Stephen Boyd.

Srinivas Kandagatla (4):
  arm64: dts: fix i2c pinconf sleep state function
  arm64: dts: qcom: Add msm8916 I2C nodes.
  arm64: dts: apq8016-sbc: enable i2c buses on LS and HS
  arm64: dts: apq8016-sbc: enable spi buses on LS and HS

 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi  | 25 +++++++++++++++
 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 50 +++++++++++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/msm8916.dtsi      | 30 ++++++++++++++++++
 3 files changed, 104 insertions(+), 1 deletion(-)


More information about the linux-arm-kernel mailing list