[PATCH v4 00/26] ARM: pxa: magician: Rework HTC Magician support

[Petr Cvek]

Dne 6.10.2015 v 17:25 Pavel Machek napsal(a):
> Hi!

Ahoj :-),

> 
>> This patchset will clean, fix, optimize and add multiple devices,
>> which can be found on the HTC Magician machine.
>>
>> Platform data for the pasic3-leds driver has been removed, as this
>> driver do not exist in the vanilla. And it is expected to be recreated
>> in the future with an incompatible platform data structure.
>>
>> Default setting of the Samsung LCD pixel clock period has been
>> increased, so resulting frequency is 50Hz (original 117Hz). Period
>> can be possibly incresed even more. At this moment there is no video
>> player with IWMMXT support and software only versions cannot make it
>> to 30fps. Frequency decreasing has a good impact to memory troughtput
>> as LCD controller does not do as many memory bursts as at original
>> speed. This was verified with the lat_mem_rd from the lmbench3.
>>
>> The Omnivision OV9640 camera has a problem with running on 400kHz
>> of the I2C clock. It seems it freezes the bus until PXA I2C driver
>> reload. Datasheet says it OK on 400kHz though. There may be some
>> compatibility bug in the PXA I2C driver as Omnivision cameras often
>> uses special I2C protocol (SCCB).
>>
>> Using the CPU frequency scaling (with help of an MAX1587A regulator)
>> sometimes causes an SoC failure. It is probably related to the PXA27x
>> erratum E37, E36, E80 or E89. Infreqent changes mostly works.
> 
> Nice to see work done on a cellphone...
> 
> Seeing all the GPIO name changes... would it be possible / make sense
> to make to device tree one day?
Probably, but there are still some missing parts (camera, usb webcam gadget,
sound, leds, gsm GPIOs)

> 
> What userspace do you run on the phone? Can it do calls?

I have found it is faster and funny to create from scratch (and openmoko
image is too old), so I've built it by Buildroot:

Busybox, Xorg and Matchbox, but as GTK apps are not too good for 240x320 resolution
I have made my own "GUI" (so I can control Magician even without any USB/IrDA connection).

Calls are planned but by now I'm receiving SMS by hand by writing AT commands :-D.

> 
> [I have N900 here, kernel is in pretty good state, and I have Mate desktop
> running with python application for calls, but...]

Magician is very limited by RAM (64MB + 64MB Flash), so I can only have C
applications (or shell :-D).

> 
> Thanks (a pozdrav :-),
> 
> 								Pavel
>> STUART removal is a prepare for:
>>
>> 	net: irda: pxaficp_ir: dmaengine conversion
>>
>> Function was tested on the board_id 0x3a version (specifically on
>> the T-Mobile MDA compact).
>>
>> Changes from v3:
>>  * Nontrivial rebase for indentation fixup (EGPIO and PXA UDC)
>>
>> Petr Cvek (26):
>>   ARM: pxa: magician: Fix indentation in machine files
>>   ARM: pxa: magician: Change comments to be more informative
>>   ARM: pxa: magician: Print more specific error message for global
>>     GPIOs
>>   ARM: pxa: magician: Optimize debug messages for LCD power
>>   ARM: pxa: magician: Change description of LCD power GPIO
>>   ARM: pxa: magician: Add new discovered EGPIO pins
>>   ARM: pxa: magician: Fix HTC Magician pin mux definitions
>>   ARM: pxa: magician: Rename abstract LCD GPIOs
>>   ARM: pxa: magician: Optimize powerup delays for Samsung LCD
>>   ARM: pxa: magician: Optimize Samsung LCD refresh to 50Hz
>>   ARM: pxa: magician: Optimize EGPIO initial values
>>   ARM: pxa: magician: Rename charger cable detection EGPIOs
>>   ARM: pxa: magician: Fix and add charging detection functions
>>   ARM: pxa: magician: Fix platform data for both PXA27x I2C controllers
>>   ARM: pxa: magician: Fix redundant GPIO request for pxaficp_ir
>>   ARM: pxa: magician: Fix support for Intel Strata NOR Flash
>>   ARM: pxa: magician: Fix wrongly enabled USB host ports
>>   ARM: pxa: magician: Add support for ADS7846
>>   ARM: pxa: magician: Add support for Omnivision OV9640 camera
>>   ARM: pxa: magician: Add support for MAX1587A Vcore regulator
>>   ARM: pxa: magician: Add support for PXA27x UDC
>>   ARM: pxa: magician: Remove pdata for pasic3-leds
>>   ARM: pxa: magician: Remove definition of the STUART port
>>   ARM: pxa: magician: Add debug message for backlight brightness
>>     function
>>   ARM: pxa: magician: Add missing regulator for PWM backlight
>>   ARM: pxa: magician: Move platform_add_devices() to the end of
>>     magician_init()
>>
>>  arch/arm/mach-pxa/include/mach/magician.h |  70 ++-
>>  arch/arm/mach-pxa/magician.c              | 907 +++++++++++++++++++++---------
>>  2 files changed, 678 insertions(+), 299 deletions(-)
>>
>> -- 
>> 1.7.12.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>