[PATCH v2 0/5] ARM: sunxi: Introduce CHIP support

[Maxime Ripard]

Hi,

Here is a serie introducing the support for the Allwinner R8 and the
Nextthing's CHIP.

Support is almost complete for the CHIP itself, the only missing part
for now is the WiFi chip that needs to be powered through two combined
regulators (AXP209's LDO3 and LDO4). The audio codec is also missing
since it's not already enabled in the DT.

Both these features will be addressed eventually.

Let me know what you think,
Maxime

Changes from v1:
  - Collected tags
  - Removed unused include files
  - Removed ipsout, dram and vcc regulators
  - Added USB power supply

Maxime Ripard (5):
  ARM: sunxi: Add R8 support
  ARM: sun5i: Add R8 DTSI
  ARM: sun5i: dt: Move uart3 pinctrl node to common DTSI
  ARM: sun5i: dt: Add UART3 CTS and RTS pins
  ARM: sun5i: Add C.H.I.P DTS

 Documentation/arm/sunxi/README                  |   2 +-
 Documentation/devicetree/bindings/arm/sunxi.txt |   1 +
 arch/arm/boot/dts/Makefile                      |   3 +-
 arch/arm/boot/dts/sun5i-a10s.dtsi               |   7 -
 arch/arm/boot/dts/sun5i-r8-chip.dts             | 224 ++++++++++++++++++++++++
 arch/arm/boot/dts/sun5i-r8.dtsi                 |  59 +++++++
 arch/arm/boot/dts/sun5i.dtsi                    |  14 ++
 arch/arm/mach-sunxi/sunxi.c                     |   3 +-
 drivers/clk/sunxi/clk-sunxi.c                   |   1 +
 9 files changed, 304 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/boot/dts/sun5i-r8-chip.dts
 create mode 100644 arch/arm/boot/dts/sun5i-r8.dtsi

-- 
2.5.3