[PATCH 4/5] media: atmel-isi: setup YCC_SWAP correctly when using preview path

[Guennadi Liakhovetski]

On Tue, 22 Sep 2015, Josh Wu wrote:

> The preview path only can convert UYVY format to RGB data.
> 
> To make preview path work correctly, we need to set up YCC_SWAP
> according to sensor output and convert them to UYVY.
> 
> Signed-off-by: Josh Wu <josh.wu at atmel.com>
> ---
> 
>  drivers/media/platform/soc_camera/atmel-isi.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
> index bbf6449..e87d354 100644
> --- a/drivers/media/platform/soc_camera/atmel-isi.c
> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
> @@ -127,6 +127,22 @@ static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi,
>  			cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_1;
>  			break;
>  		}
> +	} else if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_RGB565) {
> +		/* Preview path is enabled, it will convert UYVY to RGB format.
> +		 * But if sensor output format is not UYVY, we need to set
> +		 * YCC_SWAP_MODE to convert it as UYVY.
> +		 */

Please, fix multiline comment style:

		/*
		 * ...
		 * ...
		 */

> +		switch (xlate->code) {
> +		case MEDIA_BUS_FMT_VYUY8_2X8:
> +			cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_1;
> +			break;
> +		case MEDIA_BUS_FMT_YUYV8_2X8:
> +			cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_2;
> +			break;
> +		case MEDIA_BUS_FMT_YVYU8_2X8:
> +			cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_3;
> +			break;
> +		}
>  	}
>  
>  	return cfg2_yuv_swap;
> -- 
> 1.9.1
>