[PATCH v3 2/4] clk: bcm2835: Add binding docs for the new platform clock driver.

[Lee Jones]

On Mon, 28 Sep 2015, Eric Anholt wrote:

> Previously we've only supported a few fixed clocks based on
> assumptions about how the firmware sets up the clocks, but this
> binding will let us control the actual (audio power domain) clock
> manager.
> 
> Signed-off-by: Eric Anholt <eric at anholt.net>
> Acked-by: Stephen Warren <swarren at wwwdotorg.org>
> ---
>  .../bindings/clock/brcm,bcm2835-cprman.txt         | 45 +++++++++++++++++++++
>  include/dt-bindings/clock/bcm2835.h                | 47 ++++++++++++++++++++++
>  2 files changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
>  create mode 100644 include/dt-bindings/clock/bcm2835.h

Acked-by: Lee Jones <lee at kernel.org>

> diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
> new file mode 100644
> index 0000000..e56a1df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
> @@ -0,0 +1,45 @@
> +Broadcom BCM2835 CPRMAN clocks
> +
> +This binding uses the common clock binding:
> +    Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +The CPRMAN clock controller generates clocks in the audio power domain
> +of the BCM2835.  There is a level of PLLs deriving from an external
> +oscillator, a level of PLL dividers that produce channels off of the
> +few PLLs, and a level of mostly-generic clock generators sourcing from
> +the PLL channels.  Most other hardware components source from the
> +clock generators, but a few (like the ARM or HDMI) will source from
> +the PLL dividers directly.
> +
> +Required properties:
> +- compatible:	Should be "brcm,bcm2835-cprman"
> +- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
> +		  found in include/dt-bindings/clock/bcm2835.h
> +- reg:		Specifies base physical address and size of the registers
> +- clocks:	The external oscillator clock phandle
> +
> +Example:
> +
> +	clk_osc: clock at 3 {
> +		compatible = "fixed-clock";
> +		reg = <3>;
> +		#clock-cells = <0>;
> +		clock-output-names = "osc";
> +		clock-frequency = <19200000>;
> +	};
> +
> +	clocks: cprman at 7e101000 {
> +		compatible = "brcm,bcm2835-cprman";
> +		#clock-cells = <1>;
> +		reg = <0x7e101000 0x2000>;
> +		clocks = <&clk_osc>;
> +	};
> +
> +	i2c0: i2c at 7e205000 {
> +		compatible = "brcm,bcm2835-i2c";
> +		reg = <0x7e205000 0x1000>;
> +		interrupts = <2 21>;
> +		clocks = <&clocks BCM2835_CLOCK_VPU>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h
> new file mode 100644
> index 0000000..d323efa
> --- /dev/null
> +++ b/include/dt-bindings/clock/bcm2835.h
> @@ -0,0 +1,47 @@
> +/*
> + * Copyright (C) 2015 Broadcom Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#define BCM2835_PLLA			0
> +#define BCM2835_PLLB			1
> +#define BCM2835_PLLC			2
> +#define BCM2835_PLLD			3
> +#define BCM2835_PLLH			4
> +
> +#define BCM2835_PLLA_CORE		5
> +#define BCM2835_PLLA_PER		6
> +#define BCM2835_PLLB_ARM		7
> +#define BCM2835_PLLC_CORE0		8
> +#define BCM2835_PLLC_CORE1		9
> +#define BCM2835_PLLC_CORE2		10
> +#define BCM2835_PLLC_PER		11
> +#define BCM2835_PLLD_CORE		12
> +#define BCM2835_PLLD_PER		13
> +#define BCM2835_PLLH_RCAL		14
> +#define BCM2835_PLLH_AUX		15
> +#define BCM2835_PLLH_PIX		16
> +
> +#define BCM2835_CLOCK_TIMER		17
> +#define BCM2835_CLOCK_OTP		18
> +#define BCM2835_CLOCK_UART		19
> +#define BCM2835_CLOCK_VPU		20
> +#define BCM2835_CLOCK_V3D		21
> +#define BCM2835_CLOCK_ISP		22
> +#define BCM2835_CLOCK_H264		23
> +#define BCM2835_CLOCK_VEC		24
> +#define BCM2835_CLOCK_HSM		25
> +#define BCM2835_CLOCK_SDRAM		26
> +#define BCM2835_CLOCK_TSENS		27
> +#define BCM2835_CLOCK_EMMC		28
> +#define BCM2835_CLOCK_PERI_IMAGE	29
> +
> +#define BCM2835_CLOCK_COUNT		30