[PATCH v2] arm, am335x: add support for the bosch shc board

[Heiko Schocher]

Hello Tony,

Am 30.11.2015 um 22:41 schrieb Tony Lindgren:
> * Heiko Schocher <hs at denx.de> [151117 00:25]:
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/am335x-shc.dts
>> +&tps {
>> +	compatible = "ti,tps65217";
>> +	ti,pmic-shutdown-controller;
>> +
>> +	regulators {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		dcdc1_reg: regulator at 0 {
>> +			reg = <0>;
>> +			regulator-name = "vdds_dpr";
>> +			regulator-compatible = "dcdc1";
>> +			regulator-min-microvolt = <1300000>;
>> +			regulator-max-microvolt = <1450000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +		};
>> +
>> +		dcdc2_reg: regulator at 1 {
>> +			reg = <1>;
>> +			/*
>> +			 * VDD_MPU voltage limits 0.95V - 1.26V with
>> +			 * +/-4% tolerance
>> +			 */
>> +			regulator-compatible = "dcdc2";
>> +			regulator-name = "vdd_mpu";
>> +			regulator-min-microvolt = <925000>;
>> +			regulator-max-microvolt = <1375000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +			regulator-ramp-delay = <70000>;
>> +		};
>> +
>> +		dcdc3_reg: regulator at 2 {
>> +			reg = <2>;
>> +			/*
>> +			 * VDD_CORE voltage limits 0.95V - 1.1V with
>> +			 * +/-4% tolerance
>> +			 */
>> +			regulator-name = "vdd_core";
>> +			regulator-compatible = "dcdc3";
>> +			regulator-min-microvolt = <925000>;
>> +			regulator-max-microvolt = <1125000>;
>> +			regulator-boot-on;
>> +			regulator-always-on;
>> +		};
>> +
>> +		ldo1_reg: regulator at 3 {
>> +			reg = <3>;
>> +			regulator-name = "vio,vrtc,vdds";
>> +			regulator-compatible = "ldo1";
>> +			regulator-min-microvolt = <1000000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		ldo2_reg: regulator at 4 {
>> +			reg = <4>;
>> +			regulator-name = "vdd_3v3aux";
>> +			regulator-compatible = "ldo2";
>> +			regulator-min-microvolt = <900000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		ldo3_reg: regulator at 5 {
>> +			reg = <5>;
>> +			regulator-name = "vdd_1v8";
>> +			regulator-compatible = "ldo3";
>> +			regulator-min-microvolt = <900000>;
>> +			regulator-max-microvolt = <1800000>;
>> +			regulator-always-on;
>> +		};
>> +
>> +		ldo4_reg: regulator at 6 {
>> +			reg = <6>;
>> +			regulator-name = "vdd_3v3a";
>> +			regulator-compatible = "ldo4";
>> +			regulator-min-microvolt = <1800000>;
>> +			regulator-max-microvolt = <3300000>;
>> +			regulator-always-on;
>> +		};
>> +	};
>> +};
>
> Applying this into omap-for-v4.5/dt.. But I'm getting concerned about this
> "regulator-always-on" stuff and having multiple copies of the same thing.
>
> I think we should have a common am33xx-tps65217.dtsi file that has the
> regulators defined at one place and other then include it. And they are
> controllable AFAIK..

Hmm... Mark Brown (added to Cc) suggested to move this regulator nodes
into the board DT file and remove such files [1].

bye,
Heiko

[1] https://lkml.org/lkml/2015/10/21/581
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany