[PATCH v3 3/6] DT: PCI: qcom: Document PCIe devicetree bindings
stanimir.varbanov at linaro.org
Tue Nov 24 01:22:18 PST 2015
Thanks for the comments!
On 11/24/2015 01:17 AM, Rob Herring wrote:
> On Mon, Nov 23, 2015 at 11:29:00AM +0200, Stanimir Varbanov wrote:
>> From: Stanimir Varbanov <svarbanov at mm-sol.com>
>> Document Qualcomm PCIe driver devicetree bindings.
>> Signed-off-by: Stanimir Varbanov <svarbanov at mm-sol.com>
>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov at linaro.org>
>> .../devicetree/bindings/pci/qcom,pcie.txt | 231 ++++++++++++++++++++
>> 1 file changed, 231 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
>> new file mode 100644
>> index 000000000000..d7640d45fa31
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
>> @@ -0,0 +1,231 @@
>> +* Qualcomm PCI express root complex
>> +- compatible:
>> + Usage: required
>> + Value type: <stringlist>
>> + Definition: Value shall include
>> + - "qcom,pcie-v0" for apq/ipq8064
>> + - "qcom,pcie-v1" for apq8084
> Use chip part numbers, not versions.
> Also, shouldn't you have the Designware compatible in addition.
>> +- <name>-gpio:
> Use -gpios
Ok I will.
More information about the linux-arm-kernel