[PATCH v7 0/6] Build and support rk3036 SoC platform
zhengxing at rock-chips.com
Mon Nov 23 22:49:36 PST 2015
OK, Thanks Heiko. :-)
On 2015年11月24日 08:03, Heiko Stübner wrote:
> Hi Xing Zheng,
> Am Donnerstag, 5. November 2015, 15:33:54 schrieb Xing Zheng:
>> We need to support rk3036 soc platform via upstream, there are
>> some primary parts for the initial release of minimum system: dts,
>> clk-pll, smp, and clock tree for rk3036, and additional, we can use
>> these startup and run to init processs.
> after talking with Mike and agreeing that I'm again taking the regular
> clock patches to them, I've applied all of this to appropriate branches.
> I did some cosmetics, as explained below.
>> Xing Zheng (6):
>> dt-bindings: add documentation of rk3036 clock controller
>> clk: rockchip: add dt-binding header for rk3036
>> clk: rockchip: add new pll-type for rk3036 and similar socs
> - wrapped some overly long lines, otherwise this is similar to what
> Stephen already took for the rk3066-pll-type.
>> clk: rockchip: add clock controller for rk3036
>> ARM: dts: rockchip: add core rk3036 dts
> - split off the evb into a separate patch
> - reordered some nodes (please order by the address (the @xxxxxxxx)
> - reordered some properties
> - fixed the gic cpu masks
>> ARM: dts: enable smp for rk3036
> folded into the core dtsi addition
> Please take a final look at  to make sure I didn't mess up anything.
More information about the linux-arm-kernel