[PATCH RESEND 4/8] arm64: dts: berlin4ct: add watchdog nodes

[Jisheng Zhang]

The Marvell Berlin BG4CT has 3 watchdogs which are compatible with the
snps,dw-wdt driver sit in the sysmgr domain. This patch adds the
corresponding device tree nodes.

Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
---
 arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index a3b5f1d..8eddf10 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -241,6 +241,30 @@
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
+			wdt0: watchdog at 3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&osc>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			wdt1: watchdog at 4000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x4000 0x100>;
+				clocks = <&osc>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog at 5000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x5000 0x100>;
+				clocks = <&osc>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
 			sm_gpio0: gpio at 8000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x8000 0x400>;
-- 
2.6.1