[PATCH 2/2] arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS

Chanwoo Choi cw00.choi at samsung.com
Sun Nov 15 18:55:34 PST 2015


Hi,

On 2015년 11월 16일 10:36, Krzysztof Kozlowski wrote:
> The ARMv8 Exynos family SoCs in Linux kernel are currently:
>  - Exynos5433 (controlled by ARCH_EXYNOS),
>  - Exynos7 (controlled by ARCH_EXYNOS7).
> 
> It duplicates Kconfig symbols unnecessarily, so consolidate them into
> one ARCH_EXYNOS. Future SoCs could fall also under the ARCH_EXYNOS
> symbol.
> 
> The commit should not bring any visible functional change.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
> ---
>  arch/arm64/Kconfig.platforms        | 11 ++---------
>  arch/arm64/boot/dts/exynos/Makefile |  2 +-
>  arch/arm64/configs/defconfig        |  2 +-
>  3 files changed, 4 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 4043c35962cc..afa19baca94e 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -13,21 +13,14 @@ config ARCH_BERLIN
>  	  This enables support for Marvell Berlin SoC Family
>  
>  config ARCH_EXYNOS
> -	bool
> -	help
> -	  This enables support for Samsung Exynos SoC family
> -
> -config ARCH_EXYNOS7
> -	bool "ARMv8 based Samsung Exynos7"
> -	select ARCH_EXYNOS
> +	bool "ARMv8 based Samsung Exynos SoC family"
>  	select COMMON_CLK_SAMSUNG
>  	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	select HAVE_S3C_RTC if RTC_CLASS
>  	select PINCTRL
>  	select PINCTRL_EXYNOS
> -
>  	help
> -	  This enables support for Samsung Exynos7 SoC family
> +	  This enables support for Samsung Exynos ARMv8 SoC family
>  
>  config ARCH_LAYERSCAPE
>  	bool "ARMv8 based Freescale Layerscape SoC family"
> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> index 20310e5b6d6f..50c9b9383cfa 100644
> --- a/arch/arm64/boot/dts/exynos/Makefile
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -1,4 +1,4 @@
> -dtb-$(CONFIG_ARCH_EXYNOS7) += exynos7-espresso.dtb
> +dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
>  
>  always		:= $(dtb-y)
>  subdir-y	:= $(dts-dirs)
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index bdd7aa358d2a..a396fa7c69a5 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -33,7 +33,7 @@ CONFIG_MODULE_UNLOAD=y
>  # CONFIG_IOSCHED_DEADLINE is not set
>  CONFIG_ARCH_BCM_IPROC=y
>  CONFIG_ARCH_BERLIN=y
> -CONFIG_ARCH_EXYNOS7=y
> +CONFIG_ARCH_EXYNOS=y
>  CONFIG_ARCH_LAYERSCAPE=y
>  CONFIG_ARCH_HISI=y
>  CONFIG_ARCH_MEDIATEK=y
> 

When I sent the EXYNOS5433 patch[1], we don't want to add the each config
for each Exynos SoC. So, I think this patch is good to use only one ARCH_EXYNOS config
for all ARMv8 Exynos SoC.
[1] https://lkml.org/lkml/2015/2/24/85

Reviewed-by: Chanwoo Choi <cw00.choi at samsung.com>

Regards,
Chanwoo Choi




More information about the linux-arm-kernel mailing list