[PATCH] clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init

Daniel Lezcano daniel.lezcano at linaro.org
Thu Nov 12 10:36:52 PST 2015


On 11/12/2015 07:08 PM, Maxime Ripard wrote:
> Hi Daniel,
>
> On Thu, Nov 12, 2015 at 06:11:18PM +0100, Daniel Lezcano wrote:
>> The current code to initialize, register and read the clocksource is
>> already factored out in mmio.c via the clocksource_mmio_init function.
>>
>> The only difference is the readl vs readl_relaxed.
>>
>> Factor out the code with the clocksource_mmio_init function.
>>
>> Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
>> ---
>>   drivers/clocksource/timer-sun5i.c | 16 ++--------------
>>   1 file changed, 2 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
>> index bca9573..dc3793c 100644
>> --- a/drivers/clocksource/timer-sun5i.c
>> +++ b/drivers/clocksource/timer-sun5i.c
>> @@ -152,13 +152,6 @@ static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
>>   	return IRQ_HANDLED;
>>   }
>>
>> -static cycle_t sun5i_clksrc_read(struct clocksource *clksrc)
>> -{
>> -	struct sun5i_timer_clksrc *cs = to_sun5i_timer_clksrc(clksrc);
>> -
>> -	return ~readl(cs->timer.base + TIMER_CNTVAL_LO_REG(1));
>> -}
>> -
>>   static int sun5i_rate_cb_clksrc(struct notifier_block *nb,
>>   				unsigned long event, void *data)
>>   {
>> @@ -217,13 +210,8 @@ static int __init sun5i_setup_clocksource(struct device_node *node,
>>   	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
>>   	       base + TIMER_CTL_REG(1));
>>
>> -	cs->clksrc.name = node->name;
>> -	cs->clksrc.rating = 340;
>> -	cs->clksrc.read = sun5i_clksrc_read;
>> -	cs->clksrc.mask = CLOCKSOURCE_MASK(32);
>> -	cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
>> -
>> -	ret = clocksource_register_hz(&cs->clksrc, rate);
>> +	ret = clocksource_mmio_init(base + TIMER_CNTVAL_LO_REG(1), node->name,
>> +				    rate, 340, UINT_MAX, clocksource_mmio_readw_down);
>
> Shouldn't it be clocksource_mmio_readl_down?

Ah yes. Thanks for catching this. I will fix it.

   -- Daniel


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog




More information about the linux-arm-kernel mailing list