[RESEND][PATCH 1/5] ARM: sa1100: add platform functions to handle PWER settings

[Russell King - ARM Linux]

No cover letter, so I'll top-reply to the first patch, since my comments
aren't specific to this patch.

Patches 1-3 look fine, no problem there.

Patches 4 and 5 I think should be in the reverse order - update the IRQ
code first, and make it independent of things in arch/arm/mach-sa1100,
and once that's done, move it out of there.

On Mon, May 18, 2015 at 05:44:03PM +0300, Dmitry Eremin-Solenikov wrote:
> PWER settings logically belongs neither to GPIO nor to system IRQ code.
> Add special functions to handle PWER (for GPIO and for system IRQs)
> from platform code.
> 
> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
> ---
>  arch/arm/mach-sa1100/generic.c | 24 ++++++++++++++++++++++++
>  include/soc/sa1100/pwer.h      | 15 +++++++++++++++
>  2 files changed, 39 insertions(+)
>  create mode 100644 include/soc/sa1100/pwer.h
> 
> diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
> index 40e0d86..c651f6e 100644
> --- a/arch/arm/mach-sa1100/generic.c
> +++ b/arch/arm/mach-sa1100/generic.c
> @@ -23,6 +23,8 @@
>  
>  #include <video/sa1100fb.h>
>  
> +#include <soc/sa1100/pwer.h>
> +
>  #include <asm/div64.h>
>  #include <asm/mach/map.h>
>  #include <asm/mach/flash.h>
> @@ -416,3 +418,25 @@ void sa1110_mb_enable(void)
>  	local_irq_restore(flags);
>  }
>  
> +int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
> +{
> +	if (on)
> +		PWER |= BIT(gpio);
> +	else
> +		PWER &= ~BIT(gpio);
> +
> +	return 0;
> +}
> +
> +int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
> +{
> +	if (BIT(irq) != IC_RTCAlrm)
> +		return -EINVAL;
> +
> +	if (on)
> +		PWER |= PWER_RTC;
> +	else
> +		PWER &= ~PWER_RTC;
> +
> +	return 0;
> +}
> diff --git a/include/soc/sa1100/pwer.h b/include/soc/sa1100/pwer.h
> new file mode 100644
> index 0000000..15a545b
> --- /dev/null
> +++ b/include/soc/sa1100/pwer.h
> @@ -0,0 +1,15 @@
> +#ifndef SOC_SA1100_PWER_H
> +#define SOC_SA1100_PWER_H
> +
> +/*
> + * Copyright (C) 2015, Dmitry Eremin-Solenikov
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on);
> +int sa11x0_sc_set_wake(unsigned int irq, unsigned int on);
> +
> +#endif
> -- 
> 2.1.4
> 

-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.