[PATCH v2 2/5] clk: sunxi: support the cpus (cpu special) clock on the Allwinner A80
Maxime Ripard
maxime.ripard at free-electrons.com
Mon May 4 05:51:46 PDT 2015
Hi,
On Fri, May 01, 2015 at 12:10:03AM +0800, Chen-Yu Tsai wrote:
> The "cpus" clock is the clock for the embedded processor in the A80.
> It is also part of the PRCM clock tree.
>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
> Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
> drivers/clk/sunxi/Makefile | 2 +-
> drivers/clk/sunxi/clk-sun9i-cpus.c | 243 ++++++++++++++++++++++
> 3 files changed, 245 insertions(+), 1 deletion(-)
> create mode 100644 drivers/clk/sunxi/clk-sun9i-cpus.c
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index 2015b2beb957..c52735b0b924 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -27,6 +27,7 @@ Required properties:
> "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
> "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
> "allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
> + "allwinner,sun9i-a80-cpus-clk" - for the CPUS on A80
> "allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
> "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
> "allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
> diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
> index 058f273d6154..f0f33131b048 100644
> --- a/drivers/clk/sunxi/Makefile
> +++ b/drivers/clk/sunxi/Makefile
> @@ -13,4 +13,4 @@ obj-y += clk-usb.o
>
> obj-$(CONFIG_MFD_SUN6I_PRCM) += \
> clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \
> - clk-sun8i-apb0.o
> + clk-sun8i-apb0.o clk-sun9i-cpus.o
I'm really not sure about that option selection.
If you only select the A31, you will get drivers that won't be
relevant at all here.
How about something like
ifeq ($(CONFIG_MFD_SUN6I_PRCM), y)
obj-$(CONFIG_MACH_SUN6I) = ....
obj-$(CONFIG_MACH_SUN8I) = ....
obj-$(CONFIG_MACH_SUN9I) = ....
endif
?
> diff --git a/drivers/clk/sunxi/clk-sun9i-cpus.c b/drivers/clk/sunxi/clk-sun9i-cpus.c
> new file mode 100644
> index 000000000000..1ec61ccf8cbf
> --- /dev/null
> +++ b/drivers/clk/sunxi/clk-sun9i-cpus.c
> @@ -0,0 +1,243 @@
> +/*
> + * Copyright (C) 2015 Chen-Yu Tsai
> + *
> + * Chen-Yu Tsai <wens at csie.org>
> + *
> + * Allwinner A80 CPUS clock driver
> + *
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +static DEFINE_SPINLOCK(sun9i_a80_cpus_lock);
> +
> +/**
> + * sun9i_a80_cpus_clk_setup() - Setup function for a80 cpus composite clk
> + */
> +
> +#define SUN9I_CPUS_MAX_PARENTS 4
> +#define SUN9I_CPUS_MUX_PARENT_PLL4 3
> +#define SUN9I_CPUS_MUX_SHIFT 16
> +/* un-shifted mask is what mux_clk expects */
> +#define SUN9I_CPUS_MUX_MASK 0x3
> +#define SUN9I_CPUS_MUX_GET_PARENT(reg) ((reg >> SUN9I_CPUS_MUX_SHIFT) & \
> + SUN9I_CPUS_MUX_MASK)
> +
> +#define SUN9I_CPUS_DIV_SHIFT 4
> +#define SUN9I_CPUS_DIV_MASK (0x3 << SUN9I_CPUS_DIV_SHIFT)
> +#define SUN9I_CPUS_DIV_GET(reg) ((reg & SUN9I_CPUS_DIV_MASK) >> \
> + SUN9I_CPUS_DIV_SHIFT)
> +#define SUN9I_CPUS_DIV_SET(reg, div) ((reg & ~SUN9I_CPUS_DIV_MASK) | \
> + (div << SUN9I_CPUS_DIV_SHIFT))
> +#define SUN9I_CPUS_PLL4_DIV_SHIFT 8
> +#define SUN9I_CPUS_PLL4_DIV_MASK (0x1f << SUN9I_CPUS_PLL4_DIV_SHIFT)
You have some masks that are shifted, some that are not.
I don't really have a preference, but being consistent would be great.
(and you can use GENMASK to generate your masks).
> +#define SUN9I_CPUS_PLL4_DIV_GET(reg) ((reg & SUN9I_CPUS_PLL4_DIV_MASK) >> \
> + SUN9I_CPUS_PLL4_DIV_SHIFT)
> +#define SUN9I_CPUS_PLL4_DIV_SET(reg, div) ((reg & ~SUN9I_CPUS_PLL4_DIV_MASK) | \
> + (div << SUN9I_CPUS_PLL4_DIV_SHIFT))
> +
> +struct sun9i_a80_cpus_clk {
> + struct clk_hw hw;
> + void __iomem *reg;
> +};
> +
> +#define to_sun9i_a80_cpus_clk(_hw) container_of(_hw, struct sun9i_a80_cpus_clk, hw)
> +
> +static unsigned long sun9i_a80_cpus_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
These lines above generate checkpatch warnings, please fix them.
> + struct sun9i_a80_cpus_clk *cpus = to_sun9i_a80_cpus_clk(hw);
> + unsigned long rate;
> + u32 reg;
> +
> + /* Fetch the register value */
> + reg = readl(cpus->reg);
> +
> + /* apply pre-divider first if parent is pll4 */
> + if (SUN9I_CPUS_MUX_GET_PARENT(reg) == SUN9I_CPUS_MUX_PARENT_PLL4)
> + parent_rate /= SUN9I_CPUS_PLL4_DIV_GET(reg) + 1;
> +
> + /* clk divider */
> + rate = parent_rate / (SUN9I_CPUS_DIV_GET(reg) + 1);
> +
> + return rate;
> +}
> +
> +static long sun9i_a80_cpus_clk_round(unsigned long rate, u8 *divp, u8 *pre_divp,
> + u8 parent, unsigned long parent_rate)
> +{
> + u8 div, pre_div = 1;
> +
> + /*
> + * clock can only divide, so we will never be able to achieve
> + * frequencies higher than the parent frequency
> + */
> + if (parent_rate && rate > parent_rate)
> + rate = parent_rate;
> +
> + div = DIV_ROUND_UP(parent_rate, rate);
> +
> + /* calculate pre-divider if parent is pll4 */
> + if (parent == SUN9I_CPUS_MUX_PARENT_PLL4 && div > 4) {
> + /* pre-divider is 1 ~ 32 */
> + if (div < 32) {
> + pre_div = div;
> + div = 1;
> + } else if (div < 64) {
> + pre_div = DIV_ROUND_UP(div, 2);
> + div = 2;
> + } else if (div < 96) {
> + pre_div = DIV_ROUND_UP(div, 3);
> + div = 3;
> + } else {
> + pre_div = DIV_ROUND_UP(div, 4);
> + div = 4;
> + }
> + }
> +
> + /* we were asked to pass back divider values */
> + if (divp) {
> + *divp = div - 1;
> + *pre_divp = pre_div - 1;
> + }
> +
> + return parent_rate / pre_div / div;
> +}
> +
> +static long sun9i_a80_cpus_clk_determine_rate(struct clk_hw *hw,
> + unsigned long rate,
> + unsigned long min_rate,
> + unsigned long max_rate,
> + unsigned long *best_parent_rate,
> + struct clk_hw **best_parent_clk)
> +{
> + struct clk *clk = hw->clk, *parent, *best_parent = NULL;
> + int i, num_parents;
> + unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
> +
> + /* find the parent that can help provide the fastest rate <= rate */
> + num_parents = __clk_get_num_parents(clk);
> + for (i = 0; i < num_parents; i++) {
> + parent = clk_get_parent_by_index(clk, i);
> + if (!parent)
> + continue;
> + if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT)
> + parent_rate = __clk_round_rate(parent, rate);
> + else
> + parent_rate = __clk_get_rate(parent);
> +
> + child_rate = sun9i_a80_cpus_clk_round(rate, NULL, NULL, i,
> + parent_rate);
> +
> + if (child_rate <= rate && child_rate > best_child_rate) {
> + best_parent = parent;
> + best = parent_rate;
> + best_child_rate = child_rate;
> + }
> + }
> +
> + if (best_parent)
> + *best_parent_clk = __clk_get_hw(best_parent);
> + *best_parent_rate = best;
> +
> + return best_child_rate;
> +}
> +
> +static int sun9i_a80_cpus_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct sun9i_a80_cpus_clk *cpus = to_sun9i_a80_cpus_clk(hw);
> + unsigned long flags;
> + u8 div, pre_div, parent;
> + u32 reg;
> +
> + spin_lock_irqsave(&sun9i_a80_cpus_lock, flags);
> +
> + reg = readl(cpus->reg);
> +
> + /* need to know which parent is used to apply pre-divider */
> + parent = SUN9I_CPUS_MUX_GET_PARENT(reg);
> + sun9i_a80_cpus_clk_round(rate, &div, &pre_div, parent, parent_rate);
> +
> + reg = SUN9I_CPUS_DIV_SET(reg, div);
> + reg = SUN9I_CPUS_PLL4_DIV_SET(reg, pre_div);
> + writel(reg, cpus->reg);
> +
> + spin_unlock_irqrestore(&sun9i_a80_cpus_lock, flags);
> +
> + return 0;
> +}
> +
> +static const struct clk_ops sun9i_a80_cpus_clk_ops = {
> + .determine_rate = sun9i_a80_cpus_clk_determine_rate,
> + .recalc_rate = sun9i_a80_cpus_clk_recalc_rate,
> + .set_rate = sun9i_a80_cpus_clk_set_rate,
> +};
It all looks like you could use the factors clock for this.
The only thing that you seem to be using a custom clock for is the pre
divider on one of the parent, but that's something that could be
reused for other clocks (like the A10 pll6, or the A20 MBUS).
> +
> +static int sun9i_a80_cpus_clk_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + const char *clk_name = np->name;
> + const char *parents[SUN9I_CPUS_MAX_PARENTS];
> + struct resource *r;
> + struct sun9i_a80_cpus_clk *cpus;
> + struct clk_mux *mux;
> + struct clk *clk;
> + int i = 0;
> +
> + cpus = devm_kzalloc(&pdev->dev, sizeof(*cpus), GFP_KERNEL);
> + if (!cpus)
> + return -ENOMEM;
> +
> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + cpus->reg = devm_ioremap_resource(&pdev->dev, r);
> + if (IS_ERR(cpus->reg))
> + return PTR_ERR(cpus->reg);
> +
> + /* we have a mux, we will have >1 parents */
> + while (i < SUN9I_CPUS_MAX_PARENTS &&
> + (parents[i] = of_clk_get_parent_name(np, i)) != NULL)
> + i++;
> +
> + of_property_read_string(np, "clock-output-names", &clk_name);
> +
> + mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
> + if (!mux)
> + return -ENOMEM;
> +
> + /* set up clock properties */
> + mux->reg = cpus->reg;
> + mux->shift = SUN9I_CPUS_MUX_SHIFT;
> + mux->mask = SUN9I_CPUS_MUX_MASK;
> + mux->lock = &sun9i_a80_cpus_lock;
> +
> + clk = clk_register_composite(NULL, clk_name, parents, i,
> + &mux->hw, &clk_mux_ops,
> + &cpus->hw, &sun9i_a80_cpus_clk_ops,
> + NULL, NULL, 0);
> + if (IS_ERR(clk))
> + return PTR_ERR(clk);
> +
> + return of_clk_add_provider(np, of_clk_src_simple_get, clk);
> +}
> +
> +static const struct of_device_id sun9i_a80_cpus_clk_dt_ids[] = {
> + { .compatible = "allwinner,sun9i-a80-cpus-clk" },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver sun9i_a80_cpus_clk_driver = {
> + .driver = {
> + .name = "sun9i-a80-cpus-clk",
> + .of_match_table = sun9i_a80_cpus_clk_dt_ids,
> + },
> + .probe = sun9i_a80_cpus_clk_probe,
> +};
> +module_platform_driver(sun9i_a80_cpus_clk_driver);
> +
> +MODULE_AUTHOR("Chen-Yu Tsai <wens at csie.org>");
> +MODULE_DESCRIPTION("Allwinner A80 CPUS Clock Driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.1.4
>
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150504/040cecf3/attachment.sig>
More information about the linux-arm-kernel
mailing list