[PATCH v2 1/3] clk: sunxi: Make divs clocks specify which output is the base factor clock

[Chen-Yu Tsai]

The current sunxi clock driver has the base factor clock of divs clocks
as the last clock output of the clock node. This makes it rather difficult
to add new outputs, such as fixed dividers, which were previously unknown.

This patch makes the divs clocks data structure specify which output is
the factor clock, and updates all current divs clocks accordingly.

We can then add new outputs after the factor clocks, at least not breaking
backward compatibility with regards to the devicetree bindings.

Also replace kzalloc with kcalloc in sunxi_divs_clk_setup().

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 drivers/clk/sunxi/clk-sunxi.c | 37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index d92e30371d8a..9f31314a9cd7 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1046,13 +1046,20 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
  * sunxi_divs_clk_setup() helper data
  */
 
-#define SUNXI_DIVS_MAX_QTY	2
+#define SUNXI_DIVS_MAX_QTY	4
 #define SUNXI_DIVISOR_WIDTH	2
 
 struct divs_data {
 	const struct factors_data *factors; /* data for the factor clock */
-	int ndivs; /* number of children */
+	int ndivs; /* number of outputs */
+	/*
+	 * List of outputs. Refer to the diagram for sunxi_divs_clk_setup():
+	 * self or base factor clock refers to the output from the pll
+	 * itself. The remaining refer to fixed or configurable divider
+	 * outputs.
+	 */
 	struct {
+		u8 self; /* is it the base factor clock? (only one) */
 		u8 fixed; /* is it a fixed divisor? if not... */
 		struct clk_div_table *table; /* is it a table based divisor? */
 		u8 shift; /* otherwise it's a normal divisor with this shift */
@@ -1075,23 +1082,26 @@ static const struct divs_data pll5_divs_data __initconst = {
 	.div = {
 		{ .shift = 0, .pow = 0, }, /* M, DDR */
 		{ .shift = 16, .pow = 1, }, /* P, other */
+		/* No output for the base factor clock */
 	}
 };
 
 static const struct divs_data pll6_divs_data __initconst = {
 	.factors = &sun4i_pll6_data,
-	.ndivs = 2,
+	.ndivs = 3,
 	.div = {
 		{ .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */
 		{ .fixed = 2 }, /* P, other */
+		{ .self = 1 }, /* base factor clock, 2x */
 	}
 };
 
 static const struct divs_data sun6i_a31_pll6_divs_data __initconst = {
 	.factors = &sun6i_a31_pll6_data,
-	.ndivs = 1,
+	.ndivs = 2,
 	.div = {
 		{ .fixed = 2 }, /* normal output */
+		{ .self = 1 }, /* base factor clock, 2x */
 	}
 };
 
@@ -1122,6 +1132,10 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
 	int ndivs = SUNXI_DIVS_MAX_QTY, i = 0;
 	int flags, clkflags;
 
+	/* if number of children known, use it */
+	if (data->ndivs)
+		ndivs = data->ndivs;
+
 	/* Set up factor clock that we will be dividing */
 	pclk = sunxi_factors_clk_setup(node, data->factors);
 	parent = __clk_get_name(pclk);
@@ -1132,7 +1146,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
 	if (!clk_data)
 		return;
 
-	clks = kzalloc((SUNXI_DIVS_MAX_QTY+1) * sizeof(*clks), GFP_KERNEL);
+	clks = kcalloc(ndivs, sizeof(*clks), GFP_KERNEL);
 	if (!clks)
 		goto free_clkdata;
 
@@ -1142,15 +1156,17 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
 	 * our RAM clock! */
 	clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT;
 
-	/* if number of children known, use it */
-	if (data->ndivs)
-		ndivs = data->ndivs;
-
 	for (i = 0; i < ndivs; i++) {
 		if (of_property_read_string_index(node, "clock-output-names",
 						  i, &clk_name) != 0)
 			break;
 
+		/* If this is the base factor clock, only update clks */
+		if (data->div[i].self) {
+			clk_data->clks[i] = pclk;
+			continue;
+		}
+
 		gate_hw = NULL;
 		rate_hw = NULL;
 		rate_ops = NULL;
@@ -1209,9 +1225,6 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
 		clk_register_clkdev(clks[i], clk_name, NULL);
 	}
 
-	/* The last clock available on the getter is the parent */
-	clks[i++] = pclk;
-
 	/* Adjust to the real max */
 	clk_data->clk_num = i;
 
-- 
2.1.4