[PATCH v10 10/21] ARM64 / ACPI: Get PSCI flags in FADT for PSCI init

[Lorenzo Pieralisi]

On Wed, Mar 11, 2015 at 12:39:36PM +0000, Hanjun Guo wrote:

[...]

> +static void __init psci_0_2_set_functions(void)
> +{
> +	pr_info("Using standard PSCI v0.2 function IDs\n");
> +	psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN64_CPU_SUSPEND;
> +	psci_ops.cpu_suspend = psci_cpu_suspend;
> +
> +	psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF;
> +	psci_ops.cpu_off = psci_cpu_off;
> +
> +	psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN64_CPU_ON;
> +	psci_ops.cpu_on = psci_cpu_on;
> +
> +	psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN64_MIGRATE;
> +	psci_ops.migrate = psci_migrate;
> +
> +	psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN64_AFFINITY_INFO;
> +	psci_ops.affinity_info = psci_affinity_info;
> +
> +	psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] =
> +		PSCI_0_2_FN_MIGRATE_INFO_TYPE;
> +	psci_ops.migrate_info_type = psci_migrate_info_type;
> +
> +	arm_pm_restart = psci_sys_reset;
> +
> +	pm_power_off = psci_sys_poweroff;
> +}
> +
>  /*
>   * PSCI Function IDs for v0.2+ are well defined so use
>   * standard values.
> @@ -306,29 +335,7 @@ static int __init psci_0_2_init(struct device_node *np)
>  		}
>  	}
>  
> -	pr_info("Using standard PSCI v0.2 function IDs\n");
> -	psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN64_CPU_SUSPEND;
> -	psci_ops.cpu_suspend = psci_cpu_suspend;
> -
> -	psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF;
> -	psci_ops.cpu_off = psci_cpu_off;
> -
> -	psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN64_CPU_ON;
> -	psci_ops.cpu_on = psci_cpu_on;
> -
> -	psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN64_MIGRATE;
> -	psci_ops.migrate = psci_migrate;
> -
> -	psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN64_AFFINITY_INFO;
> -	psci_ops.affinity_info = psci_affinity_info;
> -
> -	psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] =
> -		PSCI_0_2_FN_MIGRATE_INFO_TYPE;
> -	psci_ops.migrate_info_type = psci_migrate_info_type;
> -
> -	arm_pm_restart = psci_sys_reset;
> -
> -	pm_power_off = psci_sys_poweroff;
> +	psci_0_2_set_functions();

You should have factored out the firmware version probing too, that's
the only way we can detect the PSCI firmware version when booting through
ACPI. You can end up initializing pointers for v0.2+ with a mismatching
version implemented in PSCI firmware, eg 0.1.

We should do that incrementally, I will put together a patch to
factor out the FW version probing first, you can rebase on top of it.

>  out_put_node:
>  	of_node_put(np);
> @@ -381,7 +388,7 @@ static const struct of_device_id psci_of_match[] __initconst = {
>  	{},
>  };
>  
> -int __init psci_init(void)
> +int __init psci_dt_init(void)
>  {
>  	struct device_node *np;
>  	const struct of_device_id *matched_np;
> @@ -396,6 +403,29 @@ int __init psci_init(void)
>  	return init_fn(np);
>  }
>  
> +/*
> + * We use PSCI 0.2+ when ACPI is deployed on ARM64 and it's
> + * explicitly clarified in SBBR
> + */
> +int __init psci_acpi_init(void)
> +{
> +	if (!acpi_psci_present()) {
> +		pr_info("is not implemented in ACPI.\n");
> +		return -EOPNOTSUPP;
> +	}

If PSCI is not present, that's a problem related to SMP init, right ?
That's where a warning should be printed if any, not here, the SBBR
mandates PSCI as secondaries bring up method, warn otherwise.

Lorenzo