[PATCH v8 0/7] PCI: get DMA configuration from parent device

[Murali Karicheri]

This series is already applied on arm-pci iommu branch for next, but
kbuild test robot reported build errors on x86_64 and sparc. So I am
sending v8 to help apply on arm-pci iommu branch.
 
Here is the original cover letter of the series.

This patch add an important capability to PCI driver on Keystone. I hope to
have this merged to the upstream branch so that it is available for v3.20.
Also would like thank everyone for the contribution.

PCI devices on Keystone doesn't have correct dma_pfn_offset set. This patch
add capability to set the dma configuration such as dma-mask, dma_pfn_offset,
and dma ops etc using the information from DT. The prior RFCs and discussions
are available at [1] and [2] below.

[2] : https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg790244.html
[1] : http://www.gossamer-threads.com/lists/linux/kernel/2024591

Change history:
	v8 - On request from Bjorn, I am resending the whole series with also
	     ack from Rob Herring against 2/7
	v7 - Used for re-spinning 2/7 and 6/7. Fixed build issues on x86_64 and
	     sparc reported by kbuild test robot
	v6 - Rebased to v3.19-v7
	   - Addressed some minor comments about node name and DT size validation.
	   - Pulled out 8/8 of v5 and plan to send a patch for enhancing
	     of_dma_configure() to use size to calculate dma mask.
	   - Added Acks from reviewers.
	v5 - moved the dma_mask update in device from ARM specific API to
	     of_dma_configure to allow this across other architecture as well
	   - improved sanity check for DT dma-range size in of_dma_configure()
	   - moved API to get parent bridge device to PCI (host-bridge.c)
	v4 - moved size adjustments in of_iommu_configure() to a separate patch
	   - consistent node name comment from Rob
	   - patch 6 added for dma_mask adjustment and iommu mapping size
	     limiting.
	v3 - addressed comments to re-use of_dma_configure() for PCI
	   - To help re-use, change of_iommu_configure() function argument
		- Move of_dma_configure to of/device.c
		- Limit the of_iommu_configure to non pci devices
	v2 - update size to coherent_dma_mask + 1 if dma-range info is missing
	   - also check the np for null.
	v1 - updates based on the comments against initial RFC.
	   - Added a helper function to get the OF node of the parent
	   - Added an API in of_pci.c to update DMA configuration of the pci
	     device.

Cc: Joerg Roedel <joro at 8bytes.org>
Cc: Grant Likely <grant.likely at linaro.org>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Bjorn Helgaas <bhelgaas at google.com>
Cc: Will Deacon <will.deacon at arm.com>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit at amd.com>

Acked-by: Bjorn Helgaas <bhelgaas at google.com>
Acked-by: Murali Karicheri <m-karicheri2 at ti.com>

Murali Karicheri (7):
  of: iommu: Add ptr to OF node arg to of_iommu_configure()
  of: Move of_dma_configure() to device.c to help re-use
  of: Fix size when dma-range is not used
  PCI: Add helper functions pci_get[put]_host_bridge_device()
  of/pci: Add of_pci_dma_configure() to update DMA configuration
  PCI: Update DMA configuration from DT
  arm: dma-mapping: limit IOMMU mapping size

 arch/arm/mm/dma-mapping.c |    7 +++++
 drivers/iommu/of_iommu.c  |   10 ++++--
 drivers/of/device.c       |   74 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/of/of_pci.c       |   18 +++++++++++
 drivers/of/platform.c     |   58 ++---------------------------------
 drivers/pci/host-bridge.c |   14 +++++++++
 drivers/pci/probe.c       |    2 ++
 include/linux/of_device.h |    3 ++
 include/linux/of_iommu.h  |    6 ++--
 include/linux/of_pci.h    |    3 ++
 include/linux/pci.h       |    3 ++
 11 files changed, 138 insertions(+), 60 deletions(-)

-- 
1.7.9.5