[PATCH 1/3] ARM: dts: imx6qdl-sabrelite: Allow HDMI and LVDS to work simultaneously
fabio.estevam at freescale.com
Mon Jun 29 09:16:53 PDT 2015
Currently it is not possible to have HDMI and LVDS working simultaneously,
because both ports try to use PLL5.
Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be
driven from independent sources.
With this change the LDB pixel clock goes to 68.57 MHz, which is still
within the valid range for the HSD100PXN1 LVDS panel.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index e00c44f..d87e71c 100644
@@ -148,6 +148,13 @@
status = "okay";
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio3 19 0>;
More information about the linux-arm-kernel