[PATCH 3/5] dts: imx6: fix sd card gpio polarity specified in device tree
Dong Aisheng
aisheng.dong at freescale.com
Wed Jun 17 10:33:36 PDT 2015
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().
Signed-off-by: Dong Aisheng <aisheng.dong at freescale.com>
---
arch/arm/boot/dts/imx6dl-riotboard.dts | 8 ++++----
arch/arm/boot/dts/imx6q-arm2.dts | 5 +++--
arch/arm/boot/dts/imx6q-gk802.dts | 3 ++-
arch/arm/boot/dts/imx6q-tbs2910.dts | 4 ++--
arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 4 +++-
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 8 ++++----
arch/arm/boot/dts/imx6qdl-rex.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 8 ++++----
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 6 ++++--
arch/arm/boot/dts/imx6sl-evk.dts | 10 +++++-----
arch/arm/boot/dts/imx6sx-sabreauto.dts | 4 ++--
arch/arm/boot/dts/imx6sx-sdb.dtsi | 4 ++--
23 files changed, 55 insertions(+), 49 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 43cb3fd..5111f51 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -305,8 +305,8 @@
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio1 4 0>;
- wp-gpios = <&gpio1 2 0>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -314,8 +314,8 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 0>;
- wp-gpios = <&gpio7 1 0>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 78df05e..d6515f7 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -11,6 +11,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx6q.dtsi"
/ {
@@ -196,8 +197,8 @@
};
&usdhc3 {
- cd-gpios = <&gpio6 11 0>;
- wp-gpios = <&gpio6 14 0>;
+ cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 703539c..00bd63e 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -7,6 +7,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx6q.dtsi"
/ {
@@ -161,7 +162,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
- cd-gpios = <&gpio6 11 0>;
+ cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index a43abfa..5645d52 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -251,7 +251,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
- cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -260,7 +260,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
- cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e6d9195..f4d6ae5 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -173,7 +173,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
vmmc-supply = <®_3p3v>;
- cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -181,7 +181,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
vmmc-supply = <®_3p3v>;
- cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 1d85de2..a47a039 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -392,7 +392,7 @@
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
no-1-8-v;
status = "okay";
};
@@ -400,7 +400,7 @@
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
no-1-8-v;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 59e5d15..ff41f83 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -258,6 +258,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
vmmc-supply = <®_3p3v>;
- cd-gpios = <&gpio1 4 0>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 2c253d6..45e7c39 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/gpio/gpio.h>
+
/ {
regulators {
compatible = "simple-bus";
@@ -181,7 +183,7 @@
&usdhc2 { /* module slot */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio2 2 0>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b5756c2..4493f6e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -318,7 +318,7 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 86f03c1..a857d12 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -324,7 +324,7 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4a8d97f..1afe338 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -417,7 +417,7 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 62a82f3..6dd0b76 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -299,6 +299,6 @@
&pinctrl_hummingboard_usdhc2
>;
vmmc-supply = <®_3p3v>;
- cd-gpios = <&gpio1 4 0>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 3af16df..d7fe667 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -453,7 +453,7 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 0>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -461,7 +461,7 @@
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = <&gpio2 6 0>;
+ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1ce6133..9b149c7 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -409,8 +409,8 @@
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio1 4 0>;
- wp-gpios = <&gpio1 2 0>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -418,7 +418,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3
&pinctrl_usdhc3_cdwp>;
- cd-gpios = <&gpio1 27 0>;
- wp-gpios = <&gpio1 29 0>;
+ cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 488a640..3373fd9 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -342,7 +342,7 @@
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -351,6 +351,6 @@
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 3b24b12..e329ca5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -467,8 +467,8 @@
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- cd-gpios = <&gpio6 15 0>;
- wp-gpios = <&gpio1 13 0>;
+ cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index e00c44f..7823793 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -448,8 +448,8 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio7 0 0>;
- wp-gpios = <&gpio7 1 0>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -457,7 +457,7 @@
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = <&gpio2 6 0>;
+ cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_3p3v>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a626e6d..944eb81 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -562,8 +562,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <8>;
- cd-gpios = <&gpio2 2 0>;
- wp-gpios = <&gpio2 3 0>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -571,8 +571,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <8>;
- cd-gpios = <&gpio2 0 0>;
- wp-gpios = <&gpio2 1 0>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f02b80b..da08de3 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -680,7 +680,7 @@
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
no-1-8-v;
- cd-gpios = <&gpio7 2 0>;
+ cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
status = "okay";
};
@@ -690,7 +690,7 @@
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
no-1-8-v;
- cd-gpios = <&gpio7 3 0>;
+ cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 5fb0916..9e096d8 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -9,6 +9,8 @@
*
*/
+#include <dt-bindings/gpio/gpio.h>
+
/ {
regulators {
compatible = "simple-bus";
@@ -250,13 +252,13 @@
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 2 0>;
+ cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio3 9 0>;
+ cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 945887d..b84dff2 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -617,8 +617,8 @@
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
- cd-gpios = <&gpio4 7 0>;
- wp-gpios = <&gpio4 6 0>;
+ cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -627,8 +627,8 @@
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
- cd-gpios = <&gpio5 0 0>;
- wp-gpios = <&gpio4 29 0>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -637,6 +637,6 @@
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- cd-gpios = <&gpio3 22 0>;
+ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index e3c0b63..115f3fd 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -49,7 +49,7 @@
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
- cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
@@ -61,7 +61,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
- cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
no-1-8-v;
keep-power-in-suspend;
enable-sdio-wakup;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index cef04ce..ac88c34 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -293,7 +293,7 @@
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
- cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
@@ -304,7 +304,7 @@
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
status = "okay";
};
--
1.9.1
More information about the linux-arm-kernel
mailing list