[PATCH 1/7] mtd: pxa3xx_nand: add a non mandatory ECC clock

Antoine Tenart antoine.tenart at free-electrons.com
Tue Jun 2 10:32:25 PDT 2015


Some controllers (as the coming Berlin nand controller) need to enable
an ECC clock. Add support for this clock in the pxa3xx nand driver, and
leave it as non mandatory.

Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
 drivers/mtd/nand/pxa3xx_nand.c | 32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 42ad199ed63d..ae8a7b6b3e5c 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -180,7 +180,7 @@ struct pxa3xx_nand_info {
 	struct nand_hw_control	controller;
 	struct platform_device	 *pdev;
 
-	struct clk		*clk;
+	struct clk		*clk, *ecc_clk;
 	void __iomem		*mmio_base;
 	unsigned long		mmio_phys;
 	struct completion	cmd_complete, dev_ready;
@@ -1685,15 +1685,26 @@ static int alloc_nand_resource(struct platform_device *pdev)
 
 	spin_lock_init(&chip->controller->lock);
 	init_waitqueue_head(&chip->controller->wq);
-	info->clk = devm_clk_get(&pdev->dev, NULL);
+	info->clk = devm_clk_get(&pdev->dev, "nfc");
 	if (IS_ERR(info->clk)) {
-		dev_err(&pdev->dev, "failed to get nand clock\n");
-		return PTR_ERR(info->clk);
+		info->clk = devm_clk_get(&pdev->dev, NULL);
+
+		if (IS_ERR(info->clk)) {
+			dev_err(&pdev->dev, "failed to get nand clock\n");
+			return PTR_ERR(info->clk);
+		}
 	}
 	ret = clk_prepare_enable(info->clk);
 	if (ret < 0)
 		return ret;
 
+	info->ecc_clk = devm_clk_get(&pdev->dev, "ecc");
+	if (!IS_ERR(info->ecc_clk)) {
+		ret = clk_prepare_enable(info->ecc_clk);
+		if (ret < 0)
+			goto fail_disable_clk;
+	}
+
 	if (use_dma) {
 		/*
 		 * This is a dirty hack to make this driver work from
@@ -1710,7 +1721,7 @@ static int alloc_nand_resource(struct platform_device *pdev)
 				dev_err(&pdev->dev,
 					"no resource defined for data DMA\n");
 				ret = -ENXIO;
-				goto fail_disable_clk;
+				goto fail_disable_ecc_clk;
 			}
 			info->drcmr_dat = r->start;
 
@@ -1719,7 +1730,7 @@ static int alloc_nand_resource(struct platform_device *pdev)
 				dev_err(&pdev->dev,
 					"no resource defined for cmd DMA\n");
 				ret = -ENXIO;
-				goto fail_disable_clk;
+				goto fail_disable_ecc_clk;
 			}
 			info->drcmr_cmd = r->start;
 		}
@@ -1729,14 +1740,14 @@ static int alloc_nand_resource(struct platform_device *pdev)
 	if (irq < 0) {
 		dev_err(&pdev->dev, "no IRQ resource defined\n");
 		ret = -ENXIO;
-		goto fail_disable_clk;
+		goto fail_disable_ecc_clk;
 	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	info->mmio_base = devm_ioremap_resource(&pdev->dev, r);
 	if (IS_ERR(info->mmio_base)) {
 		ret = PTR_ERR(info->mmio_base);
-		goto fail_disable_clk;
+		goto fail_disable_ecc_clk;
 	}
 	info->mmio_phys = r->start;
 
@@ -1745,7 +1756,7 @@ static int alloc_nand_resource(struct platform_device *pdev)
 	info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
 	if (info->data_buff == NULL) {
 		ret = -ENOMEM;
-		goto fail_disable_clk;
+		goto fail_disable_ecc_clk;
 	}
 
 	/* initialize all interrupts to be disabled */
@@ -1766,6 +1777,8 @@ static int alloc_nand_resource(struct platform_device *pdev)
 fail_free_buf:
 	free_irq(irq, info);
 	kfree(info->data_buff);
+fail_disable_ecc_clk:
+	clk_disable_unprepare(info->ecc_clk);
 fail_disable_clk:
 	clk_disable_unprepare(info->clk);
 	return ret;
@@ -1788,6 +1801,7 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
 	pxa3xx_nand_free_buff(info);
 
 	clk_disable_unprepare(info->clk);
+	clk_disable_unprepare(info->ecc_clk);
 
 	for (cs = 0; cs < pdata->num_cs; cs++)
 		nand_release(info->host[cs]->mtd);
-- 
2.4.2




More information about the linux-arm-kernel mailing list