[PATCH 07/20] ARM: at91/dt: at91sam9263: use slow clock where necessary

[Alexandre Belloni]

The watchdog, the reset controller, the two real-time timers and the
shutdown controller need the slow clock, add it where necessary.

Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
---
Cc: Jean-Christophe Plagniol-Villard <plagnioj at jcrosoft.com>
 arch/arm/boot/dts/at91sam9263.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index e36d966ef5e8..dc168acfebdd 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -384,11 +384,13 @@
 			rstc at fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			shdwc at fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			pinctrl at fffff200 {
@@ -902,6 +904,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-- 
2.1.4