[PATCH 18/18] KVM: ARM64: Add KVM_CAP_ARM_PMU and KVM_ARM_PMU_SET_IRQ

Christoffer Dall christoffer.dall at linaro.org
Fri Jul 17 08:32:13 PDT 2015


On Mon, Jul 06, 2015 at 10:17:48AM +0800, shannon.zhao at linaro.org wrote:
> From: Shannon Zhao <shannon.zhao at linaro.org>
> 
> Add KVM_CAP_ARM_PMU for userspace to check whether KVM supports PMU. Add
> KVM_ARM_PMU_SET_IRQ for userspace to set PMU IRQ number.
> 
> Signed-off-by: Shannon Zhao <shannon.zhao at linaro.org>
> ---
>  arch/arm/kvm/arm.c       | 8 ++++++++
>  include/kvm/arm_pmu.h    | 5 +++++
>  include/uapi/linux/kvm.h | 4 ++++
>  virt/kvm/arm/pmu.c       | 9 +++++++++
>  4 files changed, 26 insertions(+)
> 
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 41eb063..350866e 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -182,6 +182,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
>  	case KVM_CAP_ARM_PSCI_0_2:
>  	case KVM_CAP_READONLY_MEM:
>  	case KVM_CAP_MP_STATE:
> +	case KVM_CAP_ARM_PMU:
>  		r = 1;
>  		break;
>  	case KVM_CAP_COALESCED_MMIO:
> @@ -816,6 +817,13 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
>  			return -E2BIG;
>  		return kvm_arm_copy_reg_indices(vcpu, user_list->reg);
>  	}
> +	case KVM_ARM_PMU_SET_IRQ: {
> +		uint32_t irq;
> +
> +		if (copy_from_user(&irq, argp, sizeof(irq)))
> +			return -EFAULT;
> +		return kvm_pmu_set_irq_num(vcpu, irq);
> +	}
>  	default:
>  		return -EINVAL;
>  	}
> diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
> index 5bcf27b..1a93f53 100644
> --- a/include/kvm/arm_pmu.h
> +++ b/include/kvm/arm_pmu.h
> @@ -58,6 +58,7 @@ void kvm_pmu_enable_interrupt(struct kvm_vcpu *vcpu, unsigned long val);
>  void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, unsigned long val);
>  void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, unsigned long data,
>  				    unsigned long select_idx);
> +int kvm_pmu_set_irq_num(struct kvm_vcpu *vcpu, u32 irq);
>  void kvm_pmu_init(struct kvm_vcpu *vcpu);
>  #else
>  void kvm_pmu_sync_hwstate(struct kvm_vcpu *vcpu) {}
> @@ -76,6 +77,10 @@ void kvm_pmu_enable_interrupt(struct kvm_vcpu *vcpu, unsigned long val) {}
>  void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, unsigned long val) {}
>  void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, unsigned long data,
>  				    unsigned long select_idx) {}
> +int kvm_pmu_set_irq_num(struct kvm_vcpu *vcpu, u32 irq)
> +{
> +	return -ENXIO;
> +}
>  static inline void kvm_pmu_init(struct kvm_vcpu *vcpu) {}
>  #endif
>  
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index 716ad4a..90f5e73 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -817,6 +817,7 @@ struct kvm_ppc_smmu_info {
>  #define KVM_CAP_DISABLE_QUIRKS 116
>  #define KVM_CAP_X86_SMM 117
>  #define KVM_CAP_MULTI_ADDRESS_SPACE 118
> +#define KVM_CAP_ARM_PMU 119
>  
>  #ifdef KVM_CAP_IRQ_ROUTING
>  
> @@ -1205,6 +1206,9 @@ struct kvm_s390_ucas_mapping {
>  /* Available with KVM_CAP_X86_SMM */
>  #define KVM_SMI                   _IO(KVMIO,   0xb7)
>  
> +/* Available with KVM_CAP_ARM_PMU */
> +#define KVM_ARM_PMU_SET_IRQ	  _IOW(KVMIO, 0xb8, __u32)
> +

does this really warrant a completely new ioctl?  Perhaps a new kvm
device that you create with a PMU would be better, in that way you could
choose whether you want the PMU for the guest or not.

Alternatively, we have some room to spare in the features array of
KVM_ARM_VCPU_INIT.

Alternatively to the alternative, does the IRQ number appear in any
register somewhere?  If so, we could use the ONE_REG interface to set
the irq number.

In any case, the new ABI should be documented in
Documentation/virtual/kvm/api.txt.


>  #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
>  #define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
>  #define KVM_DEV_ASSIGN_MASK_INTX	(1 << 2)
> diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c
> index f957b85..57585e1 100644
> --- a/virt/kvm/arm/pmu.c
> +++ b/virt/kvm/arm/pmu.c
> @@ -381,6 +381,15 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, unsigned long data,
>  	pmc->perf_event = event;
>  }
>  
> +int kvm_pmu_set_irq_num(struct kvm_vcpu *vcpu, u32 irq)
> +{
> +	struct kvm_pmu *pmu = &vcpu->arch.pmu;
> +
> +	kvm_info("kvm_arm_set_pmu_irq: irq: %u\n", irq);

kvm_debug instead?

> +	pmu->irq_num = irq;
> +	return 0;
> +}
> +
>  /**
>   * kvm_pmu_init - Initialize global PMU state for per vcpu
>   * @vcpu: The vcpu pointer
> -- 
> 2.1.0
> 

Thanks,
-Christoffer



More information about the linux-arm-kernel mailing list