[PATCH v2 15/20] ARM: DTS: am335x-evmsk: Add sleep pin settings for mcasp1

Peter Ujfalusi peter.ujfalusi at ti.com
Thu Jul 2 07:06:30 PDT 2015


When McASP is not in use the pins can be put to sleep mode to conserve
power.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
 arch/arm/boot/dts/am335x-evmsk.dts | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 2f62d915b438..8abfe2a2ff4a 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -396,6 +396,15 @@
 		>;
 	};
 
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
 			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
@@ -661,8 +670,9 @@
 };
 
 &mcasp1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
 	status = "okay";
 
-- 
2.4.5




More information about the linux-arm-kernel mailing list