[PATCH 07/16] ARM: integrator: convert PCI to use generic config accesses
Bjorn Helgaas
bhelgaas at google.com
Thu Jan 22 12:33:36 PST 2015
On Mon, Jan 12, 2015 at 01:05:12AM +0100, Linus Walleij wrote:
> On Sat, Jan 10, 2015 at 10:53 PM, Arnd Bergmann <arnd at arndb.de> wrote:
> > On Saturday 10 January 2015 22:40:22 Linus Walleij wrote:
> >> > static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
> >> > int size, u32 *val)
> >> > {
> >> > - addr = v3_open_config_window(bus, devfn, where);
> >> > + int ret = pci_generic_config_read(bus, devfn, where, size, val);
> >> > v3_close_config_window();
> >> > + return ret;
> >> > }
> >> >
> >> > static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
> >> > int size, u32 val)
> >> > {
> >> > + int ret = pci_generic_config_write(bus, devfn, where, size, val);
> >> > v3_close_config_window();
> >> > - raw_spin_unlock_irqrestore(&v3_lock, flags);
> >> > + return ret;
> >> > }
> >> >
> >> > static struct pci_ops pci_v3_ops = {
> >> > + .map_bus = v3_open_config_window,
> >> > .read = v3_read_config,
> >> > .write = v3_write_config,
> >>
> >> So .map_bus is called before every .read/.write operation I take it.
> >>
> >> Wouldn't it be proper to call the v3_close_config_window() from a
> >> matching .unmap_bus() callback for symmetry?
> >
> > It would be nicer for integrator but useless for anything else, so
> > I'd vote for leaving it the way Rob posted.
>
> OK I buy that, throw in a comment about it in the code if there
> is some time for iterating the patch.
Would you prefer something like the following instead? It keeps the
v3_open/close symmetry, but it does break apart and duplicate some of the
logic from v3_open_config_window().
I can't build or test this.
commit 3e0c269a560968002298d22ac47bde4bd45aea8e
Author: Rob Herring <robh at kernel.org>
Date: Fri Jan 9 20:34:41 2015 -0600
ARM: integrator: Convert PCI to use generic config accessors
Convert the integrator PCI driver to use the generic config access
functions.
This changes accesses from __raw_readX/__raw_writeX to readX/writeX
variants. The spinlock is removed because it is unnecessary. The config
read and write functions are already protected with a spinlock and no
access can occur during the .pre_init function.
Signed-off-by: Rob Herring <robh at kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
CC: Russell King <linux at arm.linux.org.uk>
CC: linux-arm-kernel at lists.infradead.org
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index c186a17c2cff..c1098729cf8a 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -324,7 +324,7 @@ static u64 pre_mem_pci_sz;
* configuration address space, you present the V3 with the following pattern
* (which is very nearly a type 1 (except that the lower two bits are 00 and
* not 01). In order for this mapping to work you need to set up one of
- * the local to PCI aperatures to 16Mbytes in length translating to
+ * the local to PCI apertures to 16Mbytes in length translating to
* PCI configuration space starting at 0x0000.0000.
*
* PCI configuration cycles look like this:
@@ -356,15 +356,14 @@ static u64 pre_mem_pci_sz;
* 7:2 register number
*
*/
-static DEFINE_RAW_SPINLOCK(v3_lock);
#undef V3_LB_BASE_PREFETCH
#define V3_LB_BASE_PREFETCH 0
-static void __iomem *v3_open_config_window(struct pci_bus *bus,
- unsigned int devfn, int offset)
+static void v3_open_config_window(struct pci_bus *bus, unsigned int devfn,
+ int offset)
{
- unsigned int address, mapaddress, busnr;
+ unsigned int mapaddress, busnr;
busnr = bus->number;
@@ -381,14 +380,10 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus,
/*
* local bus segment so need a type 0 config cycle
*
- * build the PCI configuration "address" with one-hot in
- * A31-A11
- *
* mapaddress:
* 3:1 = config cycle (101)
* 0 = PCI A1 & A0 are 0 (0)
*/
- address = PCI_FUNC(devfn) << 8;
mapaddress = V3_LB_MAP_TYPE_CONFIG;
if (slot > 12)
@@ -396,26 +391,15 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus,
* high order bits are handled by the MAP register
*/
mapaddress |= 1 << (slot - 5);
- else
- /*
- * low order bits handled directly in the address
- */
- address |= 1 << (slot + 11);
} else {
/*
* not the local bus segment so need a type 1 config cycle
*
- * address:
- * 23:16 = bus number
- * 15:11 = slot number (7:3 of devfn)
- * 10:8 = func number (2:0 of devfn)
- *
* mapaddress:
* 3:1 = config cycle (101)
* 0 = PCI A1 & A0 from host bus (1)
*/
mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
- address = (busnr << 16) | (devfn << 8);
}
/*
@@ -432,8 +416,6 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus,
v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(conf_mem.start) |
V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE);
v3_writew(V3_LB_MAP1, mapaddress);
-
- return PCI_CONFIG_VADDR + address + offset;
}
static void v3_close_config_window(void)
@@ -454,70 +436,66 @@ static void v3_close_config_window(void)
V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
}
-static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *val)
+static void __iomem *v3_map_bus(struct pci_bus *bus,
+ unsigned int devfn, int offset)
{
- void __iomem *addr;
- unsigned long flags;
- u32 v;
+ unsigned int busnr = bus->number;
+ unsigned int address;
- raw_spin_lock_irqsave(&v3_lock, flags);
- addr = v3_open_config_window(bus, devfn, where);
-
- switch (size) {
- case 1:
- v = __raw_readb(addr);
- break;
+ if (busnr == 0) {
+ int slot = PCI_SLOT(devfn);
- case 2:
- v = __raw_readw(addr);
- break;
+ /*
+ * build the PCI configuration "address" with function in
+ * A10-A8 and device one-hot in A31-A11
+ */
+ address = PCI_FUNC(devfn) << 8;
- default:
- v = __raw_readl(addr);
- break;
+ /*
+ * high order bits are handled by the MAP register;
+ * low order bits handled directly in the address
+ */
+ if (slot <= 12)
+ address |= 1 << (slot + 11);
+ } else {
+ /*
+ * not the local bus segment so need a type 1 config cycle
+ *
+ * address:
+ * 23:16 = bus number
+ * 15:11 = slot number (7:3 of devfn)
+ * 10:8 = func number (2:0 of devfn)
+ */
+ address = (busnr << 16) | (devfn << 8);
}
- v3_close_config_window();
- raw_spin_unlock_irqrestore(&v3_lock, flags);
+ return PCI_CONFIG_VADDR + address + offset;
+}
+
+static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *val)
+{
+ int ret;
- *val = v;
- return PCIBIOS_SUCCESSFUL;
+ v3_open_config_window();
+ ret = pci_generic_config_read(bus, devfn, where, size, val);
+ v3_close_config_window();
+ return ret;
}
static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 val)
{
- void __iomem *addr;
- unsigned long flags;
-
- raw_spin_lock_irqsave(&v3_lock, flags);
- addr = v3_open_config_window(bus, devfn, where);
-
- switch (size) {
- case 1:
- __raw_writeb((u8)val, addr);
- __raw_readb(addr);
- break;
-
- case 2:
- __raw_writew((u16)val, addr);
- __raw_readw(addr);
- break;
-
- case 4:
- __raw_writel(val, addr);
- __raw_readl(addr);
- break;
- }
+ int ret;
+ v3_open_config_window();
+ ret = pci_generic_config_write(bus, devfn, where, size, val);
v3_close_config_window();
- raw_spin_unlock_irqrestore(&v3_lock, flags);
-
- return PCIBIOS_SUCCESSFUL;
+ return ret;
}
static struct pci_ops pci_v3_ops = {
+ .map_bus = v3_map_bus,
.read = v3_read_config,
.write = v3_write_config,
};
@@ -672,8 +650,6 @@ static void __init pci_v3_preinit(void)
hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
- raw_spin_lock_irqsave(&v3_lock, flags);
-
/*
* Unlock V3 registers, but only if they were previously locked.
*/
@@ -736,8 +712,6 @@ static void __init pci_v3_preinit(void)
v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10));
v3_writeb(V3_LB_IMASK, 0x28);
__raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
-
- raw_spin_unlock_irqrestore(&v3_lock, flags);
}
static void __init pci_v3_postinit(void)
More information about the linux-arm-kernel
mailing list