[PATCHv3 34/35] ARM: dts: dra7: add system control module node

Tero Kristo t-kristo at ti.com
Wed Feb 25 11:04:44 PST 2015


Add node for system control module, and move all the existing system
control IO space users under this new node as its children. A new node
for scm_conf area is also added.

Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
 .../devicetree/bindings/arm/omap/ctrl.txt          |    1 +
 arch/arm/boot/dts/dra7.dtsi                        |   60 ++++++++++++--------
 2 files changed, 36 insertions(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
index 3574d67..f84f4ea 100644
--- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -21,6 +21,7 @@ Required properties:
 		"ti,omap3-scrm"
 		"ti,omap4-ctrl"
 		"ti,omap5-ctrl"
+		"ti,dra7-ctrl"
 - reg:		Contains Control Module register address range
 		(base address and length)
 
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5827fed..230d22d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -203,26 +203,47 @@
 			};
 		};
 
+		scm: scm at 4a002000 {
+			compatible = "ti,dra7-ctrl", "simple-bus";
+			reg = <0x4a002000 0x1400>,
+			      <0x4a003400 0x600>,
+			      <0x4ae0c000 0x600>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4a002000 0x1400>,
+				 <1 0 0x4a003400 0x600>,
+				 <2 0 0x4ae0c000 0x600>;
+
+			scm_conf: tisyscon at 0,0 {
+				compatible = "syscon";
+				reg = <0 0x0 0x1400>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			dra7_pmx_core: pinmux at 1,0 {
+				compatible = "ti,dra7-padconf",
+					     "pinctrl-single";
+				reg = <1 0x0 0x0464>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <0x3fffffff>;
+			};
+		};
+
 		counter32k: counter at 4ae04000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x4ae04000 0x40>;
 			ti,hwmods = "counter_32k";
 		};
 
-		dra7_ctrl_core: ctrl_core at 4a002000 {
-			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
-		};
-
-		dra7_ctrl_general: tisyscon at 4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
-		};
-
 		pbias_regulator: pbias_regulator {
 			compatible = "ti,pbias-omap";
-			reg = <0 0x4>;
-			syscon = <&dra7_ctrl_general>;
+			reg = <0xe00 0x4>;
+			syscon = <&scm_conf>;
 			pbias_mmc_reg: pbias_mmc_omap5 {
 				regulator-name = "pbias_mmc_omap5";
 				regulator-min-microvolt = <1800000>;
@@ -230,17 +251,6 @@
 			};
 		};
 
-		dra7_pmx_core: pinmux at 4a003400 {
-			compatible = "ti,dra7-padconf", "pinctrl-single";
-			reg = <0x4a003400 0x0464>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x3fffffff>;
-		};
-
 		sdma: dma-controller at 4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -1410,7 +1420,7 @@
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan1";
 			reg = <0x4ae3c000 0x2000>;
-			syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+			syscon-raminit = <&scm_conf 0x558 0>;
 			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&dcan1_sys_clk_mux>;
 			status = "disabled";
@@ -1420,7 +1430,7 @@
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan2";
 			reg = <0x48480000 0x2000>;
-			syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+			syscon-raminit = <&scm_conf 0x558 1>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sys_clkin1>;
 			status = "disabled";
-- 
1.7.9.5




More information about the linux-arm-kernel mailing list